Launch BST-360 Bluetooth Battery Tester , the Bluetooth battery tester, supports: Records printing sharing via Bluetooth International battery standards 6V, 12V Battery health test, Start system test, and charging health test How to use Launch BST-36 ...
Customer problem: I have a launch x431 v+ and use it many times, it always works fine. But recently it cannot work normally. There is poor contact on the Bluetooth connector, I need to unplug and plug it in over 3 times so that it can work. Eobdtool.co.uk engineer ...
XTOOL X100 Pro3 is the upgrade version of xtool x100 pro2 and adds some special functions. Here shares some comparison. Check the following comparison table carefully. Product name Xtool X100 Pro2 Xtool X100 Pro3 Image ...
Yanhua ACDP module 19 is newly designed to work with Mini ACDP for SH725XX gearbox clone no soldering, no risk. The test: Gearbox type: BMW 7-dual-clutch (TEMIC DKG) Connect Mini ACDP, Yanhua ACDP module 9, and gearbox properly as below Run Mini ACDP APP ...
This post shares you Free download the newest software Ksuite 2.80 for KESS V2 V5.017. Kess V2 Ksuite 2.80 software free download: https://share.weiyun.com/NVJ7tLIe Password: v93vhe Size: 3.35 GB Security: No risk! Note: If you don’t have a Chinese W ...
It's a 2020 Ford Mustang. The car owner lost his all car keys. So we’re going to use Autel IM608 to program a new key to it. The procedure: Connect IM608 key programmer, MaxiFlash JVCI and the car properly Make sure the internet is good Select IMMO FO ...
Use LAUNCH X431 PAD V (PAD 5) or X431 PAD VII (PAD 7) to work with X-431 ADAS PRO or X-431 ADAS Mobile will make the calibration work so much easier. Car model: Ford F-150 2019 Device recommended: Launch X431 PAD V (PAD 5) with Smartbox 3.0 Full System Diagnostic Tool ...
This post shares with youhow to perform the ‘A/C Compressor first run’ and 'DSG Transmission Basic Setting' by using the Guided Function on X-431 PAD V . Car model: VW PASSAT 2013 1.A/C (Air COND) Compressor First Run Go to Local Diagnose European VW ...
One customer gave feedback about Launch X431 V as below: I used X431V Launch to do DPF cleaning function when the progress reached 9%, and it always prompted “the Diagnostic connector connection is abnormal or that the conditions are not right for a DPF clean.” I've tried it o ...
博客
日志
相册
个人资料
新闻
论坛
广播
好友
消息
记录
分享
分类广告