分享 VAG EDC17C64 Read and Write: PCMtuner or Foxflash?
utihakou 2023-4-11 21:05
Topic: Which ECU programmer can read and write VW Bosch EDC17C64? Here is the suggestion from eobdtool.co.uk engineer. The latest hot ECU programmers like PCMTuner and Foxflash both support. 1.By PCMTuner Magic Car Tool PCMTuner ECU Programmer can perform virtual rea ...
1206 次阅读|0 个评论
分享 What’s the Difference between Autel Maxisys Elite II Pro and Maxisys Elite II?
utihakou 2023-4-10 21:01
Autel Maxisys Elite II Pro and Elite II are advanced MaxiSys line of smart diagnostic tools. They look the same on the hardware. What’s the difference between them? Maxisys Elite II Pro is the upgraded version of Maxisys Elite II. It’s equipped with higher OS (Android 10.0), SD card ...
495 次阅读|0 个评论
分享 How to Activate V2023.03 MB SD C4 C5 Software?
utihakou 2023-4-9 20:52
Newest V2023.03 MB SD C4 C5 software (Xentry/ DAS) comes with W223 W206 W213 W167 Software License for free (valid to August 10th), it’s compatible with MB SD C4 / C4 Plus / C5, OEM Benz C6 , Super MB Pro M6 and M6+ . Check how to activate the related software inside for using on Win10 P ...
487 次阅读|0 个评论
分享 How to Select/Change Autel Diagnostic Scanners Language by yourself?
utihakou 2023-4-6 20:52
Pre-selected language is supported for the Autel diagnostic scanners that were produced after March 1st 2023. You can choose the language by yourself when you get the Autel Tablet. There are only 2 chances to choose language by yourself. First chance is you need to choose language for the f ...
1018 次阅读|3 个评论 热度 3
分享 VNCI 6154A Connection Method with WiFi and WLAN
utihakou 2023-4-5 20:50
VNCI 6154A VAG diagnostic tool supports USB, WiFi and WLAN connections to diagnose VW, AUDI, Seat and SKODA cars. Check the guide to connect with WiFi and WLAN. 1.Connect via WiFi: https://www.youtube.com/embed/9SVmnEl83oE Connect VNCI 6154A interface and vehicle, and supply power t ...
609 次阅读|0 个评论
分享 How to Install ODIS V10.0 and Update Firmware for VNCI 6154A?
utihakou 2023-4-3 21:03
VNCI 6154A is the alternative solution of the original VAS 6154A VAG diagnostic tool. It’s compatible with the original ODIS V9.10 or above diagnostic software/ODIS Engineer V14.1 or above software, and works with the original driver, doesn't need driver manager, no need for third-party software ...
1237 次阅读|0 个评论
分享 FoxFlash Read Write Renault SID310 via OBD or Boot?
utihakou 2023-4-2 21:07
Is it possible to use Foxflash ECU Programmer to read and write Renault sid310? via OBD, bench or boot? Here is the answer. OBD and Boot mode both are OK. 1.OBD Driver for Renault Master SID310 is available in foxflash software. Renault sid310 with foxflash by Tools Boot mode F ...
1073 次阅读|0 个评论
分享 How to Use Lonsdor LT20 8A+4D Toyota & Lexus Smart Key with K518ISE?
utihakou 2023-3-30 21:09
Lonsdor LT20 8A+4D Toyota Lexus Smart Key divides into three kinds of keys: Lonsdor LT20-01 , LT20-04 , and LT20-08 . They support different series boards. All can be used to work with Lonsdor K518 Key Programmer and Lonsdor KH100P to convert smart key chip type and generate remote, etc. ...
1212 次阅读|0 个评论
分享 Buy Panasonic FZ-G1 I5 3rd Gen Tablet Get Free V2023.03 Xentry SSD 256GB
utihakou 2023-3-28 20:57
eobdtool.co.uk releases a Second-hand Panasonic FZ-G1 I5 3rd generation Tablet which is refurbished, fully functional, and in excellent condition. It’s equipped with 10.1 "HD screen, Intel Core i5-6300U processor, 8GB memory and Windows 10 Pro system with WiFi. It comes without a hard disk, bu ...
883 次阅读|0 个评论
分享 OBDSTAR P50 Opel 13582437 (GM) Airbag Reset on Bench
utihakou 2023-3-23 21:21
OBDSTAR P50 is verified to reset airbag on Opel 13582437(GM) XC2xxxX on bench perfectly, no need to weld, no need PC. It can read ECU info, read DTC, clear DTC and clear crash without any issue. The airbag reset software used is V30.29. Here is the detailed operation process. It’s ...
825 次阅读|0 个评论

关于我们| 反馈意见 | 联系我们| 招聘信息| 返回手机版| 美国中文网

©2025  美国中文网 Sinovision,Inc.  All Rights Reserved. TOP

回顶部