foxFlash ECU Programmer released the solution for Land Rover Range Rover Diesel 3.0D EDC17CP55 SCR DPF EGR on October. EDC17CP55 Land Rover Range Rover 3.0D October 02, 2023 Land Rover Range Rover 3.0D SCR DPF EGR OFF Available We are very happy to announce that we have updated ...
How to use Autel MK808Z-BT to diagnose Audi/VW Simos 6.3/ Simos 18.3 ECU with Godiag GT100+ OBDII Breakout Box on bench? It’s easy and safe to operate. Check the detailed guide below. Autel MK808Z-BT with Godiag GT100+ Diagnose Audi Simos 6.3: https://youtu.be/_V6CGJnKUr4 1. ...
Is it possible to read/write Citroen C4 Spacetourer MD1CS003 ECU with Foxflash ECU Programmer via OBD? Here is the clue: 1.Before 2020 Bosch MD1CS003 BENCH! Try bench it, if locked, then no tool can do in the worldwide till now. 2.On the bench it works for sure. 3.Bench. Tested and is ...
Launch X431 IMMO Elite can erase ISM computer of Mercedes-Benz without any issue. It requires making sure the network is connected and removing the module from the vehicle to perform on the platform. Connect X431 IMMO Elite , X-prog3 programmer and DBScar VII properly Select IMMO Eu ...
Is it possible to use Yanhua ACDP to program key and change mileage on BMW BDC module via OBD? The answer is YES! Yanhua Tech newly released Module 31 for BMW F chassis BDC IMMO key programming and mileage correction via OBD. Yanhua Mini ACDP Module 31 Features: 1. The ...
It has been tested and verified by eobdtool.co.uk engineer that VNCI MDI2 GMs Diagnostic Interface 100% works with GDS2/ Tech2win/DPS Engineer Software. What is VNCI MDI2? http://blog.eobdtool.co.uk/what-is-vnci-mdi2-gms-diagnostic-interface/ Tested version: GDS2 2023.7.13 (N ...
Here come three new test reports about Autel MK808Z-BT diagnostic scanner . It works well with GODIAG GT100+ OBDII Breakout Box to diagnose ISUZU/ Mazda/ SIM2K ECUs on bench. Why use Godiag GT100+? It can be connected with any diagnostic tool to tell whether the car/ECU module, and ...
Yanhua Mini ACDP-2 can add new BMW FEM/BDC key on bench no issues (Check here ). Today, let’s learn how to use it to delete FEM/BDC key easily. Operation process: Make sure Yanhua ACDP-2 device is bound to ACDP-II APP correctly Plug FEM/BDC bench integrated interface board (ACDP-2 ...
OBDSTAR DC706 ECU Tool with the newest software ECM V30.23 can clone Bosch ME17 and ME17.8.8 ECMs on bench perfectly. Something important to know: OBDSTAR P003 Kit is required to work together. Keep DC706 charging and communicating during the process, and make sure the internet c ...
博客
日志
相册
个人资料
新闻
论坛
广播
好友
消息
记录
分享
分类广告