切换至摄影模板
博文
OBDEMOTO 900PRO BMW Motorcycle Connection Instruction
|
OBDEMOTO 900PRO Key Programmer is a motorcycle diagnostic scanner that can provide diagnosis, key matching, and ODO mileage adjustment. Besides, it's also the BMW special machine to support all key lost & add key programming by OBD without password or dismantling.
Below is the BMW connection diagram for reference.
*Need the appropriate accessories for the OBDEMOTO 900PRO diagnostic scanner.
BMW Key 46 Chip System Connection Method:
1. The main test cable is connected to the 900PRO diagnostic scanner.
2. The other end of the main test cable is connected to the K-005 adapter.
3. The K-005 adapter connects to the motorcycle diagnostic base on one end via 6-001 and to the key programmer K-006 on the other end.
BMW Key 4D/8A Chip System Connection Method:
1. The main test cable is connected to the 900PRO diagnostic scanner.
2. The other end of the main test cable is connected to the K-007 adapter.
3. One end of the K-007 adapter is connected to the motorcycle diagnostic base through 6-001 or 6-003.
免责声明：本文中使用的图片均由博主自行发布，与本网无关，如有侵权，请联系博主进行删除。
上一篇:
Xhorse Condor XC-002 PRO Cut HON66 Key Tutorial
下一篇: (Fixed) Software error when ACDP 1 authorization is transferred to ACDP 2
下一篇: (Fixed) Software error when ACDP 1 authorization is transferred to ACDP 2
全部作者的其他最新博文
- • Xhorse Multi-Prog + GODIAG GT107 Read Audi A3 DQ250 EGS
- • Alientech KESS V3 2024 Black Friday Sale: Save 50% Off!
- • LAUNCH CRP IMMO Creader Diagnostic Scanner FAQs
- • Yanhua Mini ACDP ICP Attempt To Start Mode BMW CAS3++ AKL
- • OBDSTAR ISUZU/HYUNDAI/KIA Cluster Recalibration Upgrade
- • OBDSTAR BENZ FBS3 Kit for Read Pincode/Reset ECU/Program Key
