切换至摄影模板
博文
How to Strip Volvo Engine a Cylinder Head
|
This article introduces How to Strip Volvo Engine a Cylinder Head
VOLVO 88890300 Vocom Interface for VOLVO/Renault/UD/ Mack Truck Diagnose
1.
Remove the valves and valve springs. Press the springs together with a valve spring tensioner and remove the valve lock. Place the valves in order in a marked valve rack. Remove the valve stem seals
2.
Clean all parts. Observe special care with the
3.
Remove residual soot and impurities from the cylin
der head's sealing surfaces.
Note: Do not use use steel brush to clean the cylin
der head screw threads or under the screw heads.
channels for oil and refrigerant.
免责声明：本文中使用的图片均由博主自行发布，与本网无关，如有侵权，请联系博主进行删除。
上一篇:
Yanmar Engine Starting Motor Disassembly Introduce
下一篇: Volvo MD2010, MD2020, MD2030, MD2040 Engine Dismantling of Cylinder Head
下一篇: Volvo MD2010, MD2020, MD2030, MD2040 Engine Dismantling of Cylinder Head
全部作者的其他最新博文
- • the hydraulic release of the single hydraulic circuit of the caterpillar311D LRR
- • JCB Backhoe Loader Power Shift - Chain Adjustment
- • Perkins 2806F Engine Inlet and Exhaust Valve Springs - Remove and Install
- • Caterpillar 312D2 and 313D2 Excavator 3054C Engine System Pressure- -Release
- • Parking Brake Lining Clearance and Lever Travel Adjustment on Isuzu Vehicles
- • Doosan DA30 Dump Truck the ECU Wiring Tier2 -Removal
