博文

How to Disassemble Cummins M11 Starter and Air Compressor

已有 258 次阅读2024-1-28 05:35 |系统分类:科技教育分享到微信

This article mainly introduces how to disassemble the Cummins M11 starter and air compressor

(1) Disassembly of th

starter. Use a wrench to remove the three bolts and the starter, see Figure 2-57.

(2) Disassembly of air compressor

① Remove the bolts, loosen the hose clamp, and remove the air supply pipe, see Figure 2-58. 1 2 3 1—Bolt 2—Clamp

② Remove the coolant inlet/outlet pipe from the air compressor, remove the mounting bolts, and remove the air compressor, see Figure 2-59.

③ Remove the coolant inlet pipe and joint, and remove the coolant outlet pipe positioning screw and outlet pipe, see Figure 2-60.

免责声明：本文中使用的图片均由博主自行发布，与本网无关，如有侵权，请联系博主进行删除。

上一篇: How to Disassemble and Disassemble a Doosan Engine Starter Motor
下一篇: How to Test Caterpillar Model 325C Excavator Fuel System Pressure