博文

How the Circuit Loop of The Doosan DX55-9C Excavator Works

已有 453 次阅读2023-12-28 00:33 |系统分类:科技教育分享到微信

This article introduces how the circuit loop of the Doosan DX55-9C excavator works

The electrical system provides working current to each electrical component through the loop. The

electrical system includes key switches, fuses, fuse boxes, etc. The negative pole of the battery and the

negative pole of the electrical circuit are both connected to the main frame. Even when the key switch is

in the OFF position, the battery still powers the following circuits:

1. Use fuse No. 7/13/14 to supply power to terminal 5 of the CD player, terminal 6 of the wiper motor,

terminal 13 of the wiper controller, terminal CN9-6 of the air conditioning unit, cab lights, and fuel

pump;

2023.07 Doosan DMS-5 Data Monitoring System Diagnostic Software

2. Supply power to terminal B of the key switch through fuse No. 8;

3. Terminal 1 of the hour meter is powered. When the key switch is turned to the power-on and

starting position, the current passes through the battery, battery switch, U-shaped fuse, fuse box, and the BR

terminal of the starting switch, the battery relay, and activates the coil of the battery relay to connect

the power circuit of the excavator. When the contacts of the battery relay are closed, the current

supplies power to other electronic devices through the battery switch, circuit breaker, and fuse box.

When the engine is not started, the battery supplies power to all electrical equipment, and when the

engine is started, the generator supplies power to the electronic equipment.

2020 Doosan Daewoo Excavator Operation and Repair Manual PDF

免责声明：本文中使用的图片均由博主自行发布，与本网无关，如有侵权，请联系博主进行删除。

上一篇: How to Disassemble Cummins M11 Series Engine Accessories
下一篇: How to Solve the Excessive Black Smoke Problem of Caterpillar 325C Excavator