This guide explains how to set up and use the Xhorse MVCI PRO-J2534 for vehicle diagnostics and programming. Compatible with multiple vehicle brands—such as Volvo, Nissan, Mazda, Toyota, and Honda—this tool is versatile and user-friendly.

Follow these steps to get started:

1.Download the MVCI PRO-J2534 Software

http://dl.xhorse.net.cn/product/mvci/MVCI_PRO-J2534_1.0.3.exe

Save the file to your computer and proceed to installation.

2.Install the MVCI PRO-J2534 Driver

Run the downloaded installer and follow the on-screen instructions.

After installation, locate the MVCI PRO-J2534 software icon on your desktop, confirming the setup is complete.

3.Install Vehicle-Specific J2534 Drivers

Launch the MVCI PRO-J2534 software.

Connect your MVCI PRO-J2534 device to your computer and verify the authorization details.

Navigate to the vehicle diagnostic section within the software.

Select the driver for your target vehicle (e.g., click "Toyota" for Toyota vehicles) and install it.

4.Configure the Diagnostic Software

Open the vehicle-specific diagnostic software (e.g., Toyota GTS).

Go to the setup menu and set the interface to "XH Toyota" (or the equivalent for your vehicle brand).

Save the configuration to ensure proper communication between the software and the MVCI PRO-J2534 device.

5.Begin Diagnostics and Programming

With the setup complete, you’re ready to diagnose your vehicle.

To work with other vehicle models, repeat step 3 to install the appropriate J2534 driver (e.g., Honda HDS driver for Honda vehicles).

Launch the corresponding diagnostic software (e.g., Honda HDS), configure the vehicle details, and start diagnostics or programming as needed.

Additional Notes:

Ensure your MVCI PRO-J2534 device is properly connected to both the vehicle and your computer before starting.

Always download software and drivers from official sources to avoid compatibility issues.

Video Guide:

https://www.youtube.com/watch?v=p7MmPG9eFJo

UK Professional OBD2 Tools Online Shop