How to use Lonsdor K518 Pro to program 2019 MG EZS smart key?

Check the operation guide below.

Have got two keys, one with a paper is the original key, another one is the new key.

We can only program two keys with smart function, and the third key won't.

We need to clear all the keys in the car first.

Procedures:

Step 1: Connect device and vehicle

Connect K518 Pro Key Programmer and the MG EZS car via OBD cable

Step 2: Delete key

Select Immo & Remote-> MG-> PEPS-> EZS

Select “Delete key”

Confirm to delete key

Put the new key in the cup holder

Enter the password we previously saved, and then confirm if it is correct

Key deleting is completed

Step 3: Add smart key

Select “Add key”

Enter the password again, and confirm if it is correct

Put the new key in the same position of the cup holder

Continue to program key

Program key successfully

The count of key is 1, confirm to program more keys

Take out the new key from the cup holder and put the original car key in

Wait a while until the programming is completed

The key count is 2 now

Program the second key successfully

Wait a while until the programming is completed. Otherwise, the remote of the key won’t work.

Key programming is completed.

The dashboard lights up automatically

If the keyless function doesn't work, please turn off the power at least 2 mins.

Step 4: Test keys

Close the door

Test the remote function

You can check the dashboard or listen to the sound.

Take out the original car key and leave the new key programmed in the car to try the keyless function

Step on the brake

Turn on the ignition button

Smart function of the key works

Same as remote

This car doesn't have keyless entry. Using K518 PRO to program 2019 MG smart key has completed.

UK Professional OBD2 Tools Online Shop