Xhorse MLB Solder Free Adapter Kit is available at EOBDTool.co.uk now. It is specially designed to work with VVDI MLB Tool for VW, Audi, Lamborghini, Bentley and Porsche MLB key programming without soldering. Just need to remove 2 capacitors using a plier. Much easier and safer!

MLB Solder Free Adapter Kit contains 5 types below:

Type 1 Supported Models: Audi, Lamborghini

Type 2 Supported Models: Audi, Lamborghini

Type 3 Supported Models: Audi, Bentley

Type 4 Supported Models: Porsche

Type 5 Supported Models: Volkswagen, Touareg

Connection method:

Step 1: Remove Capacitors from the Original Key

Connect the Xhorse MLB Tool to VVDI Key Tool Plus Pad using an OTG converter.

Navigate to: Immo Programming>>  Audi >> Select by Type>> MLB Immobilizer Systems

Select the corresponding key type and check the wiring diagram.

Remove the two capacitors from the original key as indicated in the diagram.

Step 2: Connect the MLB Solder-Free Adapter to Original MLB Key Board

Align the pins on the adapter with the contacts marked on the wiring diagram.

Fasten the buckle securely:

The short side of the buckle should face upwards.

The long side, marked in white, should face downwards.

Step 3: Connect MLB Adapter to MLB Tool

Attach the Xhorse MLB Adapter to the key.

Connect the MLB Adapter to the MLB Tool, ensuring proper orientation.

Ensure the adapter ends up in the sensing area for accurate detection.

Step 4: Add a Spare MLB Key

Now, follow the key programming guide below to add a spare MLB key.

(Just skip the soldering steps if you're using the solder-free adapter)

http://blog.eobdtool.co.uk/vvdi-mlb-tool-and-key-tool-plus-add-audi-a4l-key/

UK Professional OBD2 Tools Online Shop