How to reset airbag on a 2022 LYNK&CO 03 R7F701330 by OBDSTAR X300 Classic G3 via OBD?

Requirement:

• OBDSTAR X300 Classic G3 Key Programmer+ Airbag Reset Software License

Note: If you have an OBDSTAR X300 Classic G3 with Full License, no need to buy extra airbag reset software license.

• Make sure the WiFi connection is normal
• Update the airbag reset software to V31.00 or above

Operation:

Connect X300 Classic G3 Key Programmer and the vehicle via OBD cable

Select Crash Reset>> Airbag Reset>> Airbag Reset V31.00

Click “Auto Detect” at the bottom corner

Detect the part number successfully

Select the vehicle type- LYNK&CO 32275316 (BOSCH) R7F701330 (OBD)

Select OBD

Then perform the available functions below

1. Read ECU info

Check if the part number is the same as the vehicle

2. Read DTC

There is a crash fault code “Crash event storage full and locked!”

3. Erase crash

Erase crash successfully, put car into sleep mode for few minutes

4. Erase Event

5. Erase DTC

7. Read DTC again to check if the DTC is cleared successfully

Alright! That is the whole process to do airbag reset on 2022 LYNK&CO 03 R7F701330 with OBDSTAR X300 Classic G3 via OBD. Easy and fast!

UK Professional OBD2 Tools Online Shop