Confirmed! Yanhua Mini ACDP2 with Module 34 change mileage on VW MQB dashboard with 3426+95128 chip model perfectly. No soldering, No need to pry up the chip pins, No capacitor removal, No soldering required to read and write data without damage.

Note:

If you have Yanhua ACDP 2 and Module 33, you can buy Yanhua Module 34 at a cheaper price.

Operation guide:

Turn on the power switch on the car and light up the instrument panel

Record the current mileage (i.e. 700 km)

Power on Yanhua ACDP2 and open Mini ACDP APP

Check the upper right corner to confirm the ACDP device has been bound

Select VW>> VW MQB IMMO>> MQB48 (VDO/JCI-NEC34xx +95128 5A)>> ICP ODO>>

D70F3426+95128>> D70F3426-A Interface Board D70F3426+95128

Click “Help” to check the connection diagram and connect Mini ACDP 2, MQB 3426+95128 chip dashboard and Mini ACDP Module 34 interface board correctly (click here to check the installation guide)

And then select “Auto Mode”

Confirm to repair the mileage

Detect Pins are good contact

Verify the chip information, and save the CPU data after reading

Save the EEPROM data after reading and verify the instrument information

Input the new mileage 680, and save the CPU data after the mileage has been modified

Save the EEPROM data after the mileage has been modified as well

Modify mileage successfully

Finally, install the instrument panel into the car and turn on the dashboard

Check if the mileage on the dashboard is the same as modified. They are the same. Works fine!

UK Professional OBDs2 Tools Online Shop