Alientech KESS V3 ECU Programmer with the advanced DynoDrive function allows customers calculate and verify while driving a vehicle. The DynoDrive feature can be activated by all users with KESS3 Master Version and Slave Version and does NOT require an active subscription. It can also be activated on KESS3 Hardware WITHOUT any active protocol package. Check more details below.

PART ONE

KESS3 DynoDrive Overview

1.What is KESS V3 DynoDrive?

Through the OBD diagnostic port and data acquisition from the integrated GPS module, DynoDrive provides power and torque values of a car that can be exported and compared endlessly on your reserved area.

The DynoDrive application allows you to revolutionize vehicle testing on the road, without additional costs for dedicated equipment. The experience of testing a car transforms into a unique opportunity to verify the vehicle’s performance and evaluate the effectiveness of any modifications.

Gain a valuable ally to improve your work and ensure customers a high-quality service, meeting their expectations. With DynoDrive, every road test will provide real and reliable values that represent a tangible parameter to certify your work with cutting-edge technology and ease of system use.

2.What is the highlight of DYNODRIVE?

• Activation through Alientech suite
• Calculation accuracy
• Quick and customised parameter selection
• Test repeatability
• Data comparison and sharing

3.When do you need DynoDrive for KESS V3?

• Calculating and verifying performance while driving a vehicle
• Immediate testing and verifying vehicle’s performance
• Evaluate the effectiveness of any modifications

PART TWO

How to Activate DynoDrive function on Alientech KESS3?

Purchse DynoDrive alone, no need subscription

DynoDrive Activation for KESS3 hardware (without active protocol)

You can buy Alientech KESS3 hardware and only DynoDrive without any protocol activation or add it to your existing KESS3 Protocols.

Alientech KESS3 Hardware with DynoDrive Activation

Once purchased, Alientech Suite will display “DynoDrive” feature on the menu bar, and you can use it forever, not 12 months only!

Add DynoDrive activation to configure your KESS V3 Master/Slave version, or get KESS3 hardware only with DynoDrive activation, thus configuring the tool even just to support power testing. This allows integration a third version, KESS3 DynoDrive, alongside the existing KESS3 Master and KESS3 Slave versions.

NOTE:

1.Kess3 has a GPS and an accelerator. RPM etc via OBD. Using the OBD port and data from the KESS3’s integrated GPS module, you can export and compare the power and torque values of a car.

2.DynoDrive is not free for existing customers. You have to pay for activation.

3.DynoDrive is just a virtual Dyno no dataloging function.

PART THREE

How to do power test with DynoDrive function on Alientech KESS V3?

After activating the DynoDrive function, it can be used with Alientech Kess3 ECU Programmer normally.

WARNING:

DYNO DRIVE SHOULD NOT BE USED ON PUBLIC ROADS AND HIGHWAYS!!!

Car model: i.e. Peugeot Partner (2nd) (2015) 1.6 BlueHDi 55KW BOSCH EDC17C60

Open Alientech Suite software, input EDC17C60 Peugeot partner in the search box

Quickly find the corresponding car model

Select it and click “Continue”

Select “DynoDrive” and “Continue”

Confirm to see the manual to check the detailed operation instruction

Click the yellow icon to agree to the processing of location area

Click “Continue”

Connect KESS V3 ECU Programmer to the diagnosis socket via the OBD cable, turn on the vehicle’s engine and select “Check”

Parameter check in progress…

Do not turn off the engine and do not disconnect the cable.

Verification completed successfully, you can carry out the power test.

Select “Continue” to proceed

Enter the data correctly, incl. vehicle mass, passenger mass, fuel volume, pressure, temperature and Label

Need to tick “Atmospheric data”

Then click “START TEST”

Starting power test…

Reach 1500 RPM in third dear.

Press the spacebar and maintain a constant speed

At the first beep, decelerate to 1400.

At the second beep, accelerate to the limiter, then put into neutral wait for the third beep.

Power test performed correctly

Finally, login the DynoDrive account and password, and you can check the corresponding power test report in the History option.

Alientech KESS3MKW0 DynoDrive Activation for KESS V3 Master / Slave Hardware:
https://www.eobdtool.co.uk/wholesale/kess3-dynodrive-activation.html

Alientech KESS3 Hardware Main Unit with DynoDrive Activation for Power Testing:

https://www.eobdtool.co.uk/wholesale/kess3-hardware-with-dynodrive-activation.html

UK Professional OBD2 Tools Online Shop