Yanhua Volvo (2023-) CEM Interface Board Set New Arrival! It’s specially designed to work with Mini ACDP2 to read Volvo (2023-2024) CEM data by ICP. No need to dismantle any chip or components! No soldering!

1.Feature

• Read VOLVO CEM

No need to dismantle any chip or components

No soldering

No damage

No mark

• Special interface board replaces welding, pins are intelligently detected, and data reading and writing are safe and reliable.

2.Supported Volvo models

Supports 2023-2024 Volvo S60 /S90/XC60 and Lynk&Co, etc

Volvo SPC5748G (Volvo-24) and SPC5748C (Link Co-23) are newly added.

Kindly notice:

For Volvo 2022- 2023.6, need to use Yanhua ACDP Module 20 and Yanhua Volvo (2023-) CEM Interface Board.

For Volvo 2023.7- 2024, need to use Yanhua Volvo (2023-) CEM Interface Board and Volvo (2022-) IMMO License. (Note: New users need to buy IMMO license, but old customers who purchased an IMMO License before, no need to buy extra, can buy a new interface board only).

How to use Yanhua Volvo (2023-2024) CEM Interface Board and ACDP 2?

Run ACDP software or APP

Select Volvo>> IMMO>> S60 (2022- ) or S90 (2022- ) or XC60 (2022- ) or Lynk Co option>> Read CEM data by ICP>> Select the car model supported

Then perform the function supported

Volvo SPC5748G (Volvo-24) and Mini ACDP2 connection method:

1.Prepare all accessories

2.Push the lock fastening of the interface board to the unlock position, find the interface board installation area on the CEM according to the visual positioning mark on the interface board.

3.Place the interface board against the CEM socket, and align with the three positioning holes

4.Test the Point Pin definition

5.Press down on the Volvo CEM interface board, push the PCB lock buckle to the Locked position to lock the interface board, installation is done.

Overall connection diagram:

Volvo SPC5748C (Link Co-23) and Mini ACDP-2 connection method:

1.Prepare all accessories

2.Push the lock fastening of the interface board to the unlocks position, find the interface board installation area on the CEM according to the visual positioning mark on the interface board.

3.Align the interface board against the CEM socket, and align with the two positioning holes

4.Test the Point Pin definition

5.Press down on the interface board, push the PCB lock buckle to the Locked position to lock the interface board, installation is done.

Overall connection diagram:

Yanhua Mini ACDP ACDP-2 Volvo (2023 - 2024) CEM Interface Board Kit:

https://www.eobdtool.co.uk/wholesale/yanhua-volvo-2023-cem-interface-board-set.html