VVDI MLB-Tool can work either independently with Xhorse Key Tool Plus or in conjunction with VVDI2 and PC software. Today let’s see how to add new keys to Audi A4L by MLB Tool and Key Tool Plus.

Operation guide:

Connect MLB Tool and VVDI Key Tool Plus

The short USB (OTG) cable should be connected to KeyTool Plus, while the long USB A to C cable needs to be connected to MLB-Tool.

If you connect with incorrect cable, it may result in communication issues.

Place the original car key in the key identification area of Xhorse VVDI MLB-Tool

Then operate on VVDI Key Tool Plus Pad

Select IMMO Programming>> Audi>> Select by type>> MLB Immobilizer Systems>> Start programming

Make sure the network connection is normal

Start to perform the supported functions one by one.

Step 1: Identify key

Select Identification key to read key info

Step 2: Connect key and MLB Tool

Select Connection diagram and select the corresponding type (Type 3 Audi/Bentley)

Follow the instruction to do

1. Remove componentsof original key as diagram shown (2 capacitors)

2. Soldering cable to originalkey according to different color as diagram shown.

Place the key with MLB cable connected in the Xhorse MLB Tool key identification area

Note: the TOP side needs to face upwards.

Step 3: Collect key data

Select Collect key data

In general, it is recommended to the vehicle info first. The calculated IMMO file will contain all the IDs of original vehicle keys.

Select the method of data collection

The OEM key here is the VVDI MLB specialized key. When using this key, allows you to calculate the data free of charge points and each specialized key can only be used to calculate the data once.

Select as needed (i.e. No OEM key)

This process doesn’t require on-board collection.

After the collection is completed, the data will be automatically uploaded and calculated.

Save the IMMO data. The data can be used to make dealer key and learn keys.

Step 4: Make dealer key

Select Make dealer key, select the file to be loaded

Insert the new key into the key identification area of VVDI MLB Tool area and wait for the process is complete

Step 5: Learn key

Perform the key learning on the vehicle

For Xhorse VVDI Key Tool Plus Pad, turn on the ignition switch, connect Key Tool Plus Pad to vehicle via the OBD cable

Keep the key close to the sensing coil

Select Learn key on Key Tool Plus

Follow the prompts to complete key learning

Input the number of keys to be learned (i.e. 2)

Load the IMMO data

Click OK to start

Learn the first key successfully, and then use the same method to learn the next key

Step 6: Test key

After learning key, test the new key on the vehicle.

Check the smart function of key (remote control), one- touch start, one keyless entry, and lock

Xhorse VVDI MLB-Tool Key Programmer:

https://www.eobdtool.co.uk/wholesale/xhorse-mlb-tool.html