Both OBDSTAR DC706 ECU Tool and X300 Classic G3 can calibrate mileage for VW AISIN AQ25009G R4F7058F95320 TCM by Bench+ P004 mode. G3 Full Version and DC706 Full Version don’t require an extra Cluster Calibration License. If you buy a G3 key programmer alone (#SP539-EU), you need to buy the license as well.

To perform this function, please make sure the device and network connection are normal.

OBDSTAR P004 Adapter & ECU Clone Jumper, main cable, and 12V power supply are required to work with DC706 and X300 G3.

Both OBDSTAR tools have the operation instruction and wiring diagram in the device system, which can help you connect the device and VW TCM to perform the available function easily and fast.

1.Select ECU Flasher>> TCM>> TCM software version>> 09g>> VW AISIN AQ250 (09G) R4F7058F+95320

2.Check the wiring diagram to connect OBDSTAR DC706/OBDSTAR X300 G3 and VW TCM using P004 Adapter & ECU Clone Jumper and main cable, connect 12V power supply to main cable

3. Turn on the switch button on P004 Adapter

4. Select Bench and P004 mode, and start to perform the functions supported according to the on-screen prompt

5. Connect ECU

6. Read and save INT Flash and EEPROM data

7. Select [Mileage Calibration] and input the new mileage you desire to change

8. After calibration, disconnect ECU

OBDSTAR DC706 Correct Mileage for VW AISIN AQ25009G R4F7058F95320: 

OBDSTAR X300 Classic G3 Correct Mileage for VW AISIN AQ25009G R4F7058F95320:

UK Professional OBD2 Tools Online Shop