博客栏目停服公告
因网站改版更新,从9月1日零时起美国中文网将不再保留博客栏目,请各位博主自行做好备份,由此带来的不便我们深感歉意,同时欢迎 广大网友入驻新平台!
美国中文网
2024.8.8
OBDSTAR DC706 with ECM V30.70 can read and write Volkswagen 7GV ECM EXT EEPROM (95320), read IMMO data and do IMMO OFF in Bench mode successfully. OBDSTAR P004 Adapter & ECU Clone Jumper, main cable and 12V power supply are required for this function.
Operation guide:
Select ECU Flasher>> ECM>> ECM V30.70>> 7gv>> Volkswagen MAGNETI MARELLI IAW 7GV 95320
Need to connect 12V, GND and K-Line cables
Follow the PIN diagram to connect DC706 and ECM properly using the corresponding accessories, and connect the 12V power supply to P004 Adapter
Turn on the switch button of OBDSTAR Adapter
Select BENCH and P004 mode to start the operation
No need to connect, directly back up data
Read and save EXT EEPROM (95320) data- OK
Write EXT EEPROM (95320) data- OK
Load the original EXT EEPROM (95320) data to Read IMMO data
Read out the PinCode, CS, MAC, and VIN- OK
Click IMMO OFF and follow the prompts to turn on or off ignition, write EXT EEPROM success
Besides, OBDSTAR DC706 ECU Tool also can use BENCH+ P003 mode to perform this function for Volkswagen 7GV ECM perfectly.
http://blog.eobdtool.co.uk/obdstar-dc706-read-write-vw-7gv-9gv-ecm-on-bench/