OBDSTAR DC706 with ECM V30.61 (newest) can read and write Flash and EEPROM data for Smart EDC16C32, EDG15C-5.X KLINE, ME17.9.20 and ME7.7.0 KLINE ECMs on Bench. Some support Boot and OBD modes as well.

Check the support list below carefully.

How to read and write Smart ECM by OBDSTAR DC706?

i.e. SMART BOSCH ME17.9.20 TC1782

Accessories required:

• OBDSTAR Bench-A V3 cables
• OBDSTAR MP001 Programmer
• Main cable
• 12V 5A power supply (DC)

Function supported:

• Read& write INT Flash
• Read& write INT EEPROM
• Write VIN
• Reset (Virgin)

Operation mode:

On Bench

Step-by-step guide:

Select ECU Flasher>> ECM>> ECM V30.61>> ME17.9.20>> SMART BOSCH ME17.9.20 TC1782

Check the Pinout diagram, and connect DC706, MP001 Programmer and ECM via the corresponding cable correctly, connect the 12V power supply as well

After connection, click Start, and select BENCH and MP001

Make sure the internet connection is normal to perform the read and write function.

1.Conenct ECU

2.Read INT EEPROM and INT Flash separately, save the files after reading

3.Select the corresponding file of original ECM to write into a new ECM

4.We also can write VIN, and reset ECU by selecting “Reset (Virgin)”.

All read and write operations are easy and fast to operate with OBDSTAR DC706 ECU Tool.

Done!

UK Professional OBD2 Tools Online Shop