VNCI 6516SZ Suzuki diagnostic scanner is compatible with SDT-II OEM software and original VCI driver (no need 3rd party driver), and can replace the genuine MTS 6516 Suzuki diagnostic interface. It supports USB, WiFi and WLAN three connection methods, and works with the Suzuki diagnostics application running on a PC to diagnose Suzuki vehicles. Follow this post to free download and install SDT-II 2.29.0.4 software and Bosch VCI driver before using VNCI 6516SZ for the first time.

Free download VNCI SUZUKI SDT-II 2.29.0.4 (392.7 MB)

https://mega.nz/file/qSIQXISD#8QMUcEgc7WEVJFZb7VKGsIZ4MpgB_zTmFxTI-45e2Js

Free download BOSCH VCI Driver Installer R2_4_22_59 (183.5 MB)

https://mega.nz/file/tP80BD4Q#ki7uCAcDcxWLAuQHKSiFF39v0nQap03htzi0vEqOz4g

• Operating system: Win7, Win10
• Multi-language: German, Greek, English, Spanish, French, Hungarian, Indonesian, Italian, Japanese, Dutch, Norwegian, Polish, Portuguese, Russian, Slovak, Swedish, Thai, Turkish, Chinese

• Function:

Support all Suzuki models

Diagnostic/ programming/ immobilizer

VIN check, vehicle health check, CAN bus check…

Step-by-step to install VNCI 6516SZ Suzuki Software and Driver:

Step 1. Install BOSCH VCI Driver Installer R2_4_22_59

After downloaded, open BOSCH VCI Driver Installer R2_4_22_59 on the desktop

Install Bosch VCI Software (JLR)-2.4.22.59

Wait the installation is completed

Step 2. Install SUZUKI SDT-II 2.29.0.4

Open SUZUKI SDT-II_soft_2290004 application on the desktop

Install Bosch VCI software (6516-Suzuki)-2.1.1.40

It will ask you to configure USB.

Connect VNCI Suzuki scanner to a computer via USB cable

Go to Computer Management (Local)>> Device Manager>> WIN-ITAUOR5FFKE>> Network adapters>> Bosch VCI>> Update driver

Click “Browse my computer for driver software”

Click “Let me pick form a list of available drivers on my computer”

Select “Bosch VCI” to update the driver

Update the driver successfully

Click “Configure” to configure USB

If it prompts the error message “Unable to detect the presence of VCI on USB port. Please make sure that the VCI is powered ON. Press Configure to Retry. (29)” as shown in the figure below

Here is the solution:

1.Don’t click on “OK”

2.Restart the computer

3.Don’t connect the USB cable!

4.Install VNCI SUZUKI SDT-II 2.29.0.4 software again

Step 3. Install VNCI Device Manager V1.9

Open VNCI MDI 1.90 on the desktop

Select language, and follow the prompt to install

Install VNCI Device Manager V1.9 successfully

Go to computer management to check the network adapter, Bosch VCI is installed successfully

Step 4. Update VCI Device Manager Software and Firmware

Open VCI Device Manager on the desktop

Update the software and firmware to the latest version

Step 5.Connect VNCI 6516SZ Scanner

Run VCI Manager (6516-Suzuki)

Click on “Connect” to connect VCI

Step 6. Set up Suzuki SDT-II software 

Open Suzuki SDT-II software on the desktop

Select the language and destination you desire

Then start to diagnose Suzuki vehicles with VNCI 6516SZ Suzuki diagnostic interface.

Done!

2024 VNCI 6516SZ Suzuki Diagnostic Interface:

https://www.eobdtool.co.uk/wholesale/vnci-6516sz-suzuki-diagnositc-interface.html