Now OBDSTAR P50 Airbag Reset Tool can repair Toyota Steering Angle Sensor (clear crash) by bench. No matter 2nd, or 3rd and 4th generation encrypted MCU repair. What you need to do is upadte the software to V30.00 or above, and follow the connection diagram and step-by-step guide in the device software to operate easily.

http://blog.eobdtool.co.uk/obdstar-p50-update-toyota-lexus-steering-angle-sensor-sas-repair-on-bench/

Here take Toyota 89245-12040 steering angle as an example.

All goods required:

OBDSTAR P50 main unit

OBDSTAR P004 Adapter and Jumper

Main cable

12V power supply

Toyota 89245-12040 (TOKAI RIKA)

Operation guide:

1.Keep P50 charging and communication during the operation and make sure the network connnection is normal.

2.Select [Airbag Reset] on the main menu

3.Manully selet the part number: Toyota 89245-12040 (TOKAI RIKA)

4.Check the Pinout diagram:

5.Use OBDSTAR P004 Jumper to connect P004 Adapter and Toyota module

And use main cable to connect P004 Adapter and P50 airbag reset tool

Turn on the power of P004 Adapter

6.Click [Connect] to connect ECU

Afrer the connection is successful, you can find that there are collision data records in the module data.

7.Click [Erase crash]

Erase Toyota crash successfully

8.Now you need to calibrate the angle back to zero degree.

When the angle is at zero degree, the status bar and current detection angle will show green.

9.Click [Disconnect], and turn off the power of OBDSTAR P004 Adapter

10.Once the calibration is completed, we can fix it with a tie to prevent deviation.

When loading, make srue that the steering wheel is centered and key off before installing the angle sensor.

Video Guide:

https://youtu.be/Ei-wDMz1Wx0

UK Professional OBD2 Tools Online Shop