博文

VAG EDC16U34 ECU IMMO OFF Script OK with Xhorse Multi Prog

已有 357 次阅读2024-2-29 20:57 分享到微信

VAG Bosch EDC16U34 ECU Immo OFF, checksum, read and write OK

in bench mode

Whole process takes about 2 mins.

Connect Multi Prog Programmer and EDC16U34 ECU via ECU adapter, and connect to PC via USB cable

Select Script>> Released features>> ECU>> EDC16_VAG>> EDC16_VAG_FULL2 (DAME+IMMO+VIN+PIN+CS+VDO)

Run script

Click “R-PROG” to read EXT EEPROM

Read successfully

Click “IMMO”

Immo OFF, checksum OK

Click “Write”

When it shows “Is checksum calculated for writing files?”, click “Skip” to write raw data.

免责声明：本文中使用的图片均由博主自行发布，与本网无关，如有侵权，请联系博主进行删除。

上一篇: Otofix D1 Series Scanner Reset Screen Lock Password Guide
下一篇: 2023 KIA Add Smart Key with Launch X431 IMMO Plus/Elite