Alientech Kess V3 is able to read and write VW DQ200 TCU via OBD and bench mode.

Let’s see how to operate on bench.

KESS3 special price: €779 (€829)

EU Ship No Tax, Valid to March 15th

Protocol 1545 TEMIC DSG DQ200 VAG support ECUs:

• 0AM.927.769.D
• 0AM.927.769.F
• 0AM.927.769.M

Instruction:

Remove the ECU from the vehicle

Connect to the ECU

Select Identify ECU in the programming menu to allow correct recognition of the ECU

Always make a full backup of the ECU

Proceed with read backup and write backup.

Connection modes:

Plug in the bench power supply 1400K3ALIM to the KESS3 ECU programmer

Connect the cable 144300KBNC to the ECU connector, using the appropriate extensions 144300KTCU according to the pinout below.

Note: as an alternative, cable 144300T118 can be used.

Operation:

Connect Kess V3 to VW DQ200 TCU and computer by the corresponding cable, and supply power to Kess3 as well

Run Alientech Suite software

Update firmware to the latest version

Input dq200 to choose the desired TCU model (i.e. Audi A3 8P (2010) 1.2 TFSI S-Tronic 77 Kw)

Select Bench connection mode

Start to perform the read/write functions.

Identify ECU>> Read backup>> Write backup

It takes about 2 minutes to read backup the data, keep patient!

But it’s fast to write data!

Besides, Foxflash, PCMtuner, CG FC200, Launch X431 ECU & TCU Programmer, X431 X-Prog3 PC Adapter, Xhorse Multi-Prog, Yanhua ACDP 2/ACDP 1 with Module 13, Scanmatik2 Pro (SM2 Pro), Tactrix Openport 2.0, JLR Mongoose SDD Pro, Kess V2 also can read/write VW DQ200 TCU on bench.

Xhorse Multi-Prog Review: More Powerful Than VVDI Prog

Launch X431 ECU & TCU Programmer Audi Car List (Newest)

How to Clone VW DQ200 Gearbox via Launch X431 X-Prog3 PC Adapter?

Godiag GT107+ DSG Plus and Foxflash Read DQ200 DQ250 TCU

Godiag GT107+ Read DQ200 DQ250 with VCX SE/JLR Mongoose SDD Pro

VAG DQ200 and DQ250 Gearbox Read by Godiag GT107+ Scanmatik2 Pro (SM2 Pro)

Godiag GT107+ and Kess V2 Read DQ200/DQ250 Gearbox Data

VAG DQ200/DQ250 Gearbox Read with Godiag, PCMTuner, CG FC200 or Tactrix Openport 2.0?

How to Read and Write VW DL501 GEN2 TCM with OBDSTAR DC706 on Bench?

UK Professional OBD2 Tools Online Shop