博客栏目停服公告
因网站改版更新,从9月1日零时起美国中文网将不再保留博客栏目,请各位博主自行做好备份,由此带来的不便我们深感歉意,同时欢迎 广大网友入驻新平台!
美国中文网
2024.8.8
Use Foxflash ECU programmer to perform DTC off, read and write ECU on a Toyota Urban Cruiser 2009 1.4 d4d Bosch EDC17CP07 Unit, works fine!
Bosch EDC17CP07 [1766]-TOYOTA [Diesel] Pinout in Foxflash software:
Red: +12V | 1, 61, 77 |
Black: Ground | 2 |
Blue: CAN-H | 81 |
Orange: CAN-L | 80 |
White | 73 |
Brown | 59 |
To read and write use the following driver:
-> BENCH TRICORE
->TOYOTA
Device connection:
Connect Bench box to foxflash tool and ECU via multifunction cable
Connect foxflash and computer via USB cable
Supply power to foxflash
Connect ECU and read data successfully
Read Int Flash Micro
Enter a file name (i.e. Toyota urban ori) to save the data
Keep ECU power on
Read the original data successfully
End of read, turn off the dashboard button
Send the file to the 3rd party to clear the error codes
Got the file and deleted two errors in the ramp, the high-pressure sensor and too much oil are always written as an error and the level is normal.
Press CONNECT
Keep power on
Try to read the immobilizer, everything turned out well
Turn on the ignition
Click Write Int Flash Micro and select the error file to write
Confirm to correct checksum
Load the original file for checksum correction
Correct checksum and write data with foxflash ECU Chip Tuning Tool successfully
The DTC is off now.