Here is the simple operation guide.

1.Connect Foxflash tool and a computer via the USB cable

Connect the Bench Box to foxflash ECU programmer and power it through the round jack of the bench box itself or from the round jack of foxflash.

2.Run foxflash Manager

Select TOOLS BENCH MODE>> TEST for BENCH BOXES>> TEST BENCH BOX V2

Click Info to read the test note

This driver is useful for testing the Bench Box V.2

During the test:

The relays will be triggered at different speeds.

The red LED will flash several times.

3.Click Start Test

Make sure the bench box is connected without ECU and powered.

Test bench box V2 successfully

NOTE:

If the bench box self-test result is fine, but foxflash software has no communication, the problem may be the voltage, ECU or wiring connection. Please try to check one by one.

UK Professional OBD2 Tools Online Shop