Generate FEM/BDC key with CGDI BMW Pro and Godiag FEM/BDC Test Platform on bench.

Step 1: Connect device

• Connect CGDI Prog BMW MSV80 key programmer to computer via USB cable, and connect to Godiag BMW FEM/BDC Test Platform via OBD cable
• Connect Godiag Test Platform to FEM/BDC module
• Supply power to Godiag FEM Test Platform

Step2: Read Original Key Info

Run CGDI BMW software

Click FEM/BDC Key Match on the main menu

Select one blank key (i.e. key 8) and click “Generate dealer key”

Select “Reading the car key” to enter the ISN code

Put the original key into to the induction coil of Godiag FEM/BDC Test Platform

Read the key info successfully.

Step 3: Generate and identify new key with Autel KM100

Put a new key into the coil of Autel MaxiIM KM100E

Generate key and read the key info, the key status is not locked.

Step 4: Program new key with CGDI BMW

Put the new key generated into to the induction coil of Godiag FEM Test Platform

Program key successfully

Press the Start button of Godiag Test Platform, the programmed key lights up the analog dashboard

Step 5: Identify new key with Autel KM100

Use Autel KM100E to read the new key again, the key is locked now.

The FEM key programming is successful.

Done!