Godiag GT107+ DSG Plus can work with foxflash ECU programmer to read DQ200 and DQ250 TCU data. It needs to set GODIAG GT107 + analog ignition switch in “manual” mode.

Godiag GT107+ DSG Plus and foxflash Read DQ200:

https://youtu.be/qg5PeEOOVvM

Accessories required:

• Godiag GT107+ DSG Plus Gearbox Data Adapter
• Godiag DB9 DSG Gearbox Universal Conversion Jumper
• Foxflash ECU Chip Tuning Tool
• OBD cable
• USB cable
• Laptop
• DQ200 TCU: i.e. AUDI GEAR A3 DSG DQ200

Connection:

Connect foxflash and computer via the USB cable

Connect foxflash and Godiag GT107+ with the main cable

Connect GT107+ to DQ200 TCU according to the pinout

Supply power to foxflash

Operation:

Run foxflash manager and software

Login with the key (SN)

Select driver>> AUDI GEAR>> A3>> DSG DQ200*CAN>> OK

Click “Get ID”

Turn on the dashboard (ignition)

Read data successfully

Click “Read file”

Enable a new file to save the data

Turn off the dashboard (ignition)

Then turn on (press the GT107+ switch button), and press 120 ohm CAN resistance switch

Read DQ200 TCU data successfully

Finally, turn off the dashboard.

Godiag GT107+ DSG Plus and foxflash Read DQ250:
https://youtu.be/6CpzPsnVPB4

The connection method and operation steps are the same as DQ200.

Connect foxflash, GT107+ adapter, DQ250 TCU and computer correctly

Then run foxflash software

Select driver>> AUDI GEAR>> A3 DSG DQ250*CAN>> OK

Get ID- OK

Read file- OK

UK Professional OBD2 Tools Online Shop

foxFlash official link: https://www.foxflash.co.uk/wholesale/foxflash-ecu-tcu-clone-and-chiptuning-tool.html