Super ICOM Pro N3+ can use the J2534 protocol to read through after switching with one key.

It works well with ODIS V11 software to diagnose Volkswagen vehicles with J2534 interface.

No need to open J2534/DOIP function authorization!

Preparation:

Vehicle: i.e. 2007 Volkswagen Passat Sedan BSF 1.6L Simos/75Kw

Device: Super ICOM Pro N3+ BMW diagnostic tool

Operation procedure:

Download and install ODIS V11 (Password: 8888)

Download and install N3+ J2534 driver

Connect N3+ to computer with USB cable, and connect to the vehicle via OBD cable

Long press N3+ switch button for 3s, wait until USB and WiFi indicators on the main unit flash.

RunJ2534 software, and select VCI type as mongoose vci.

Software is ready to use.

Open VAG ODIS software

When it appears “Do you want to open or save this file”, just click “Cancel”.

Click “Diagnosis” function to identify the VIN automatically

Tick the option “work with Guided Fault Finding”

Click “Starting Diagnosis”

Vehicle identification is in automatic mode, so just select the related vehicle version and motor

Then click “Accept”

If there is no orders found, click “No RO”.

Click “Continue” to start the diagnostic entry.

Click the vehicle icon on the toolbar at the top

The DTCs are identified by Super ICOM Pro N3+ BMW diagnostic tool and ODIS V11 successfully.

Video Guide:

https://youtu.be/VjQ6gMZ1jPQ

UK Professional OBD2 Tools Online Shop