2023 Super MB Pro M6+ is 100% compatible with the original Mercedes-Benz software. It not only can support BMW Aicoder, BMW E-sys and BMW App, but also support vehicles with DOIP communication protocol.

Here are three tests on Benz and BMW with M6+.

1.Super MB Pro M6+ and HHT-WIN software test Benz W140

https://youtu.be/OOgNoZgJmQ4

2.SUPER MB PRO M6+ test BMW AiCoder with GODIAG BMW FEM/ BDC Programming Platform

https://youtu.be/_cj_kEOZ-pM

3.SUPER MB PRO M6+ test BMW E-sys with GODIAG BMW FEM/ BDC Programming Platform

https://youtu.be/ixgoFtCr8B0

Before operation, you need to connect Super MB Pro M6+ MB Star diagnostic tool with computer via USB cable or WiFi to set up network connection.

Click here to get the connection method.

Detailed procedures (with words and images):

1.Test Benz W140 with HHT-WIN software

Connect Super MB Pro M6+ diagnostic tool and Benz W140 module via the professional cable

Connect M6+ and computer via the USB cable

Supply power to Benz W140

Run HHT-WIN software

Click Enter button on the software screen to start testing

Select model>> function (i.e. Gasoline engine)>> model (i.e. HFM, ME2)

Note: Click the Enter button after each selection.

Communication with the control unit is being established…

It can support control unit version, fault memory, actual values, actuations, and control module adaptations. Just click the related option to do.

Read control unit version- OK

Read fault memory- OK

2.Test BMW AiCoder

Connect M6+, BMW module, GODIAG BMW FEM/ BDC Programming Platform and computer properly as shown in the figures below

Press and hold the black switch button for 3 seconds, and release it when you hear the relay beep.

At this time, the wired communication indicator of M6+ host flashes slowly, indicating that the switching is successful.

Open BMWAi Coder& Tools (Fxx/Ixx/Kxx/Gxx) software

Click “Option”

Default the system selection and ENET options

Click “OK” to next step

In the ENET interface, click DetectCar, Connect and Get ECUs List in sequence

Select the ECU model you want (i.e. BDC_BODY)

Right click and select the function supported to do

Here takes Read DTC as an example

Click “Read DTC”

If the fault code documentation is empty, click on the “Download” button, then you can view the corresponding description text.

Then select the language you want and click “Download”

Download successfully

3.Test BMW E-sys

Connect Super MB Pro M6+, BMW module, GODIAG BMW FEM/ BDC Programming Platform and computer properly as the same as BMW AiCoder testing.

Run E-Sys software

Follow the on-screen warning to close all applications during flash process. It also applies to background processes like indexing or defragmentation services.

Click “OK” to continue

Because of reasons of personal data, all files containing a vehicle identification number (VIN) have to be deleted, as soon as the VIN is assigned to a customer.

Click “OK”

Click the third icon on the upper toolbar

Select one target to open connection

Click “Connect”

Connection is established

Select FA and click “Activate FA”

After activation, click “Read (ECU)”, and the supported ECUs appears on the screen successfully.

2023 SUPER MB PRO M6+ Full Version:

https://www.eobdtool.co.uk/wholesale/super-mb-pro-m6-plus-full-version.html