KT200/KTM200 ECU Programmer software Common problems and solutions

1.The software cannot connect to the server

After the normal connection, click "CONNECT", the "WAIT INTERNET CONNECTION" buffer will pop up, and it has not been connected, and finally the page will pop up:

Solution:

• Take the computer WIN10 system as an example, open the windows settings:

• Search and open "Virus and Threat Protection", check whether anti-virus protection software is installed, and close and delete the anti-virus software if so.
• In windows settings, search for "firewall and network protection" settings and turn off network firewall.

• And check if Windows Defender Firewall is turned off synchronously

• After checking, make sure to close the firewall and anti-virus system software, reopen KT200, and connect to the server

• Finally show successful connection to the server

2.Diagnose detect problems and solution

• In the KT200-master folder, the suffix dll files cannot exceed three, and the extra ones can be deleted.
• There are three files Gcheck.dll, SecurityAccess.dll, wuzi.dll in the folder

3.Time zone problem

• If the time zone is inconsistent with the location, this error will be prompted

Solution: In the computer settings, search for "time", select the corresponding time zone, and synchronize the network time

4.Driver problem can't open

The driver is missing, prompt

Solution:

• Install the patch package corresponding to the system, and it can run normally

• The 32-bit system corresponds to the X86 version, and the 64-bit system corresponds to the X64 version, just install it

5.dfb2xx.dll file error

• Use Diagnose to detect, pop up

Solution:

• This is because the size of the dfb2xx.dll file in C:\windows\syswow64 is inconsistent. The size of the dfb2xx.dll file of KT200 is 202kb, not 392kb, so replace it

6.KT200 driver error solution

• When opening the software, it prompts that the driver is wrong
• Open the computer settings, search for "recovery", select "reset this computer"

• Then select "Troubleshoot"

• Then select "Advanced Options"

• Then select "Startup Settings"

• Select "Restart"

• Finally, just select "Disable automatic driver signing"

KT200 Auto Version:https://www.eobdtool.co.uk/wholesale/ktm200-ecu-chip-tuning-tool.html

KT200 Fill Version:https://www.eobdtool.co.uk/wholesale/ktm200-ecu-programmer.html