Eobdtool.co.uk engineer tested and confirmed that VW MPC555/6-VAG EDC16U1 EEPROM can be read and written by KT200/KTM200 ECU programmer in Bench mode without any issue.

This is VW MPC555/6-VAG Bosch EDC16U1 ECU module.

Before the operation, connect KT200 ECU programmer to VW ECU and computer by the PINOUT line and USB cable correctly

The connection diagram can be checked in the KT200 software

Open KT200 software(V22.08.20)

Click ‘Select Driver’

Select BENCH MODE>> VOLKSWAGEN>> MPC555/6-VAG>> EDC16U1>> INFO

Pinout connection:

Pin5: +12V (Red)

Pin18: +12V (Red)

Pin1: GND (Black)

Pin72: K-line (Green)

Pin58: Brown

Pin28: White

Back to the main interface and click ‘OK’ to enter the operation page

Click ‘Connect’ to read ECU data

Then click ‘Read Eeprom’

Create a file name to save the original data

Keep the ECU power on

Save data successfully, turn the dashboard off

Finally, click ‘Write Eeprom’

Open the original data to write into the new ECU

Keep the ECU power on

Write data successfully, turn the dashboard off

Video reference:

https://youtu.be/RslpRn-yzbc

Currently, KT200 can support Volkswagen incl. the following car models:

Amarok, Arteon

Beetle, Bora

Caddy, Crafter

Eos

Fox

Golf IV, Golf V, Golf VI, Golf VI R20, Golf VII, Golf VIII

Jetta

Lupo, LT35

Multivan

New Beetle

Passat, Phaeton, Polo

Scirocco

Sharan

T4 Bus, T5 Bus, T6 Bus, T- cross, Tiguan, Toureg, Touran, T-Roc, T-cross

Vento

...

See the images attached below (Please zoom in for a clear view)

For the full car models supported by KTM200, please check by the following list.

KT200 Support ECU List

KT200 Support TCU List

UK Professional OBD2 Tools Online Shop