博客栏目停服公告
因网站改版更新,从9月1日零时起美国中文网将不再保留博客栏目,请各位博主自行做好备份,由此带来的不便我们深感歉意,同时欢迎 广大网友入驻新平台!
美国中文网
2024.8.8
Some guys encounter this problem:After getting ecu bench tool and installing the application, registration is complete. I had try it right away on edc16u34 and it won't read ID. always says S1 and S2 pinout error.
Solution:
Make sure the driver has been installed and the wiring connection is correct.
Don't connect according to the color of the cables, follow the name marked on the cables.
Hold the Reset button to reset the device. Hold it till lights flash. And restart software.
If not working, download/ install both software and try again.
Download EBTSetup
ECU Bench Tool AMT Offline Software Download
Don't run software or firmware online updates, otherwise, we are not responsible for the damage.