博客栏目停服公告
因网站改版更新,从9月1日零时起美国中文网将不再保留博客栏目,请各位博主自行做好备份,由此带来的不便我们深感歉意,同时欢迎 广大网友入驻新平台!
美国中文网
2024.8.8
V1.27 PCMTuner with Fetrotech Tool Silver Color Version performs the same function as Fetrotech Tool Black Standalone Version. The difference is that the silver version requires an adapter to connect with PCMTuner, while black version can be used alone. Both of them support MED9 series (VAG_MED9.1.2, VAG_MED9.1, VAG_MED9.5.10 and VOLVO_ME9.0) ECU flash and EEPROM on bench without opening the cover. Here is the test on Audi MED9 ECU. Check how it works!
Operation video:
Step-by-step guide:
First, plug the connector (comes with Fetrotech Tool Silver version package) into one side of the Fetrotech Tool Silver, and then connect the other side to the PCMTuner ECU programmer
Next, connect the colored jumper to Fetrotech, and connect the other end of the colored jumper to ECU
After that, connect the USB cable to Fetrotech tool and computer
Finally, plug the power adapter to Fetrotech tool, and then the power light is on.
Turn on the computer, and the USB light is on, start to test.
Select VAG MED9 ECU-V1.0.1.10
Micro ID and then read data
Succeed!
Before operation, make sure you have downloaded and installed Fetrotech tool software correctly. If you failed to install, please check the posts below to solve.
How to Solve Fetrotech Tool Installation Package Problem on Windows 10?
(Solved) Fetrotech Tool Software Crashing and Taskbar Disappearing Problem (Win10x 64)
KT200/KTM200 ECU programmer also can read Audi MED9.1 EEPROM on bench without any issue.
Check: Audi Med9.1 EEPROM Read by KT200/KTM200 on Bench