博客栏目停服公告
因网站改版更新,从9月1日零时起美国中文网将不再保留博客栏目,请各位博主自行做好备份,由此带来的不便我们深感歉意,同时欢迎 广大网友入驻新平台!
美国中文网
2024.8.8
Customer problem:
There is something wrong with my Super MB Pro M6. It works well before, but now the software cannot connect with my car. I have done self-test. The device doesn’t have any issue and the cables are also OK. I try to do a firmware update, it shows the information fine, ip set etc, but it gives me the error DCDI_eErrorCode=661 (661). Have any idea to fix it?
Eobdtool.co.uk engineer gives the solution:
1.Replace three files in the SDconnect Toolkit bin folder as below:
Note: Contact our customer service to get the replacement files.
2.Change network connection configuration:
Go to Network and internet>> network connections
Set vEthernet (Default switch)
Open internet protocol version 4 (TCP/IIPV4) properties to set IP address and DNS server address
Tick ‘Use the following IP addresses’
IP address: 172.29.127.44
Subnet mask: 255.255.0.0
Tick ‘Use the following DNS server addresses’
Tap OK
Tech support:
Email: sales@eOBDTool.co.uk
Hotline/WhatsApp: +86 159 7293 3706
Skype: Eobdtool.co.uk