注册 登录
美国中文网首页 博客首页 美食专栏

utihakou的个人空间 //www.sinovision.net/?582062 [收藏] [复制] [分享] [RSS]

x

博客栏目停服公告

因网站改版更新,从9月1日零时起美国中文网将不再保留博客栏目,请各位博主自行做好备份,由此带来的不便我们深感歉意,同时欢迎 广大网友入驻新平台!

美国中文网

2024.8.8

分享到微信朋友圈 ×
打开微信,点击底部的“发现”,
使用“扫一扫”即可将网页分享至朋友圈。

Autel KM100 Add 2019 KIA Grand Carnival SXL Smart Remote

已有 679 次阅读2022-6-22 23:46 分享到微信

Autel MaxiIM KM100 successfully generates and programs smart remote to 2019 KIA Grand Carnival SXL.

All devices required:
 Autel MaxiIM KM100 Universal Key Generator
Autel KM100 comes with VCI OBD adapter which has LED torch
Autel IKEY
Generate smart remote with Autel IKEY which has same buttons with original

Program smart key:
Connect VCI to OBDII port
If the VCI icon is red, it means no connected
If the VCI icon is green, it means connected.

Put the original key into the KM100 hole to read
Read out the IMMO type is HITAG 3 ID47 Manchester Code locked

Check frequency
The frequency detected is 433.92 MHZ FSK.

Select universal key>> Europe>> KIA>> CARNIVAL (YP)-2018>> CARNIVAL (YP) 2014-2018 433.92MHZ FSK ID47

Install battery to the universal key, then place into the key slot of KM100
Generating universal key…

Universal key generation is completed
Check chip and frequency generated universal key

Add more smart keys:
Go to IMMO>> KIA>> Automatic selection
Turn ignition on and press read VIN
The VIN number is shown, press OK

Confirm the vehicle info: KIA Carnival YP year 2019

Select Smart key
Scan immo status…
No any faults and number of learned key: 1

Read Pincode>> Read PIN (47 Smart key)
Turn on hazard light
Read PIN need more time, just keep patient to wait
The PINCODE read out is 593797

All keys will be deleted, please prepare all available keys.
All of old keys must be relearned in order to function properly
Turn ignition off and open and close driver door once
Confirm the pincode is correct
Read the prompt and press OK, keep touching the ignition switch for 5s with the top of the key until security light flash once
Program success, press YES to add next key
Repeat the last step to touch ignition switch with the new key
Program success, now the key number of the key: 2

Finally, test all remotes.
The left and right sliding doors are function.
The back door also works well.
Start the car OK!

It’s so easy and fast to generate Autel universal key with Autel KM100, only 60 seconds!
UK Professional OBD2 Tools Online Shop


免责声明:本文中使用的图片均由博主自行发布,与本网无关,如有侵权,请联系博主进行删除。







鲜花

握手

雷人

路过

鸡蛋

评论 (0 个评论)

facelist

您需要登录后才可以评论 登录 | 注册

 留言请遵守道德与有关法律,请勿发表与本文章无关的内容(包括告状信、上访信、广告等)。
 所有留言均为网友自行发布,仅代表网友个人意见,不代表本网观点。

关于我们| 反馈意见 | 联系我们| 招聘信息| 返回手机版| 美国中文网

©2024  美国中文网 Sinovision,Inc.  All Rights Reserved. TOP

回顶部