博文

Godiag Full Protocol OBD2 Jumper Connection Diagram for BENZ IMMO Programming

已有 1031 次阅读2022-5-26 21:33 |系统分类:科技教育| godiag, gt105 分享到微信

If you don’t have the professional cable (such as Xhorse EIS/ELV Test Line) to do IMMO programming for Mercedes W164/W166/W204/W205/W222/W212/W221/ISM 7-G, the Godiag Full Protocol OBD2 Jumper is a good replacement. It can work well with GODIAG GT105 and Xhorse key programmer (e.g.VVDI MB Tool, VVDI Key Tool Plus) to program Benz EIS. As the functional definition is clearly marked on the cable and it is also equipped with DC power supply, ignition analog switch, power 12+, very convenient for the users with strong operation ability.

Follow the connection diagram below to connect all devices well, then go to read the data in the related software for IMMO programming.

Here are the full BENZ EIS connection diagrams of GODIAG tricore cable.
W169, W211, W209

W202, W208, W210

W203, W463, W639

W204, W207, W212

W212 new, W246, W166 EZS

W215, W220, W230

W221 new type

W221 old type

W639 new

W906

W164 NEC new

W164 NEC old

W166, W246

W246 one plug

MERCEDES EDC16CP31 PIN-OUT
Basic Pinout/connection diagram of Bosch EDC16CP31 ECU for Mercedes vehicles (MB CR SIGN: CR4.11/CR4.12/CR4.20 and others CR4.XX)

MERCEDES EDC15 (EDC15C6, EDC15C5) ECU PIN-OUT
Basic connection- pinout for Bosch EDC15C6, EDC15C5 Engine Control Units, used in Mercedes Benz cars.

MERCEDES EDC16 (EDC16CP31, EDC16CP32) ECU PIN- OUT

Basic connection- pinout for Bosch EDC16CP31, EDC16CP32 Engine Control Units, used in Mercedes Benz cars.