切换至摄影模板
博文
Launch X431 V+ Pro3 Solved ISUZU C07104B Steering Angle Sensor Center Position I
||
Problem:
When I start my ISUZU DMAX 2016, it doesn’t work normally. There are some dashboard indicators that appear. I try to use launch x431 v+ to diagnose it and solve the problem.
I select ISUZU software and automatically search, it says ‘Currently this function only supports models since the year 2008, please enter the test via the menu of year model for the models before 2008.’ I click ok to enter system selection page, and choose ABS/ESC/AEBS to read fault code, read out the fault code is C07104B, which means the steering angle sensor center position invalid malfunction. Then I clear fault code, it shows ‘clear fault code completed’, but when I read the fault code again, the fault code still displays on the screen. How to deal with it?
Eobdtool.co.uk engineer replied:
After reading the fault code by X431 Pro3, go to Special Function-> Learning for Steering Central Position
Then click ‘Clear’ at the bottom left of the corner
You will get the prompt ‘execute successfully!’. Then go to clear fault code again.
Feedback:
Clear the fault code successfully. Thanks so much!
For further problems, feel free to contact our customer service.
WhatsApp/Hotline:+86 159 7293 3706
Skype:Eobdtool.co.uk
Email: sales@eobdtool.co.uk
UK Professional OBD2 Tools Online Shop
When I start my ISUZU DMAX 2016, it doesn’t work normally. There are some dashboard indicators that appear. I try to use launch x431 v+ to diagnose it and solve the problem.
I select ISUZU software and automatically search, it says ‘Currently this function only supports models since the year 2008, please enter the test via the menu of year model for the models before 2008.’ I click ok to enter system selection page, and choose ABS/ESC/AEBS to read fault code, read out the fault code is C07104B, which means the steering angle sensor center position invalid malfunction. Then I clear fault code, it shows ‘clear fault code completed’, but when I read the fault code again, the fault code still displays on the screen. How to deal with it?
Eobdtool.co.uk engineer replied:
After reading the fault code by X431 Pro3, go to Special Function-> Learning for Steering Central Position
Then click ‘Clear’ at the bottom left of the corner
You will get the prompt ‘execute successfully!’. Then go to clear fault code again.
Feedback:
Clear the fault code successfully. Thanks so much!
For further problems, feel free to contact our customer service.
WhatsApp/Hotline:+86 159 7293 3706
Skype:Eobdtool.co.uk
Email: sales@eobdtool.co.uk
UK Professional OBD2 Tools Online Shop
免责声明：本文中使用的图片均由博主自行发布，与本网无关，如有侵权，请联系博主进行删除。
上一篇:
Yanhua ACDP Connect via IOS Hotspot with/Without Scanning
下一篇: Scania VCI3 SDP3 2.51.1 Free Download & Install on Win10 Pro (with activatio
下一篇: Scania VCI3 SDP3 2.51.1 Free Download & Install on Win10 Pro (with activatio
全部作者的其他最新博文
- • OBDSTAR Converter V2 DB15-OBD16 Adapter User Guide
- • How to Connect Xhorse MLB Solder Free Adapter with MLB Tool?
- • How to Program 2014 BMW X1 CAS3 Smart Key with Lonsdor K518 Pro?
- • How to Connect Yanhua ACDP Module 35 with Toyota R7F714xx ODO/Buick BCM D70F3558
- • How to Correct Toyota R7F714xx ODO/Buick BCM (NEC3558) Mileage with Yanhua ACDP2
- • CG FC200 Correct VW MED17.5.25 Mileage Guide
