博文

Solved! Tactrix Openport 2.0 Light is Not Bright Problem

已有 1030 次阅读2022-3-3 21:41 |系统分类:科技教育| Tactrix, Openport 分享到微信

Problem:
There is something wrong with my Tactrix Openport 2.0. I plugged it into the computer, and it didn’t work properly. The light was not bright. I've tried it on three computers, installed the driver, but it still didn't work. How to deal with it?

The solution offered by eobdtool.co.uk chief engineer:
Check whether the light is on after connecting the equipment to the car. If not, that means there is something wrong with the ECU programmer. You need to send back it to your dealer to repair.

Kindly notice:
Don’t update the software of Tactrix Openport 2.0! Otherwise the equipment will be locked. Once it’s locked, the light will not be on when connecting to the car or the computer.

If you have installed the high version of the software on your computer, you need to reinstall the system or change the computer, then install the Tactrix Openport 2.0 software which comes with CD to try again.

You have to know:

It is Copy one made in China, it cannot update online.
Please disconnect internet! Do not connect to the Internet when you use it otherwise device will damage.
Computer System Requirement: Windows XP/Win 7 32bits
Please close anti-virus programmer
Tactrix Openport 2.0+ cable is related to the computer CPU, you are advised to run with the Intel processor, otherwise the cable will be broken if you use with AMD processor.
You can’t run Tactrix Openport 2.0+ software together with KTMOBD and KTMflash software, otherwise the cable will be broken.

For further problems, please contact our customer service.
WhatsApp/ Hotline: +86 159 7293 3706
Skype: Eobdtool.co.uk
Email: sales@eobdtool.co.uk

UK Professional OBD2 Tools Online Shop

免责声明：本文中使用的图片均由博主自行发布，与本网无关，如有侵权，请联系博主进行删除。

上一篇: How to Use PCMTuner 1.21 and PCMFlash Software?
下一篇: 2022-03-02