切换至摄影模板
博文
User Guide: 2022 V1.21 PCMtuner with 67 Modules
||
Good news!!! The 2022 V1.21 PCMtuner 67 in 1 ECU programmer can be pre-ordered at 366EUR, the price will rise up to 458EUR after Feb 28th at eobdtool.co.uk.
Kindly notice:
If you have bought V1.20 KTM Bench, KTM Bench3 in 1, you can update it to V1.21 PCMtuner by returning the old dongle back to us for updating, or buy an extra new 2022 PCMtuner dongle.
The price:
l Update fee: €73
https://www.eobdtool.co.uk/wholesale/update-ktm-bench-to-pcmtuner.html
l 2022 PCMtuner Dongle: €183
https://www.eobdtool.co.uk/wholesale/pcmtuner-dongle.html
Note: The old KTMOBD also can be updated to V1.21 PCMtuner by returning the old dongle. Contact eobdtool.co.uk customer service to learn more.
What is the 2022 V1.21 PCMtuner?
PCMtuner tool can read and write ECU data through OBD, BENCH, and BOOT modes.
It also performs a complete backup of ECU data, easy ECUs clones, and power upgrades. Moreover, it supports gearboxes reading and writing as well.
What can 2022 PCMtuner do?
V1.21 PCM Tuner ECU programmer supports the functions as below.
1. Read and write ECU data
2. ECU clone.
3. ECU parameter adjustment
4. ECU maintenance engineering
5. Chip turning
6. Read ECU maps
7 .Checksum correction
8. Stage1-3, gearbox tuning, LC, sportdisplay, immo off, adblue off, dpf off, dtc off, vmax, swirl off
9. Read flash and ep files
10. Powertrain adjustment
11. Support online update
12. VR files supply
13. Pinout comewith
14. Helpdesk and tuner account
15. OBD2 reading
16. Cover-free wielding-free no disassembly data reading, greatly reduce the risk of destroying the ECU, bench mode.
17. Cover-opening data reading, boot mode
What’s the new upgrade of 2022 PCMtuner?
Compared with version 1.20, PCMtuner has newly added 44 protocols, and 200 Bosch ECU, MED/EDC17 read/write protocols without opening the cover.
VAG Simos 12.1, 12.2
VAG Simos 18.1, 18.2
VAG Simos 18.10
VAG Simos PCR2.1
FCA GPEC2, GPEC2A, GPEC4, GPEC4LM
Hyundai/KIA SIM2K-240, SIM2K-241,SIM2K-250, SIM2K-251, SIM2K-260, SIM2K-305, MT86
Ford/LR SID208 Flash read
FCA Marelli 8GMK/8GML, MJ9DF, 10GF
FAL Marelli MJ8DF/8F2, 8GMB/8GMC/8GMF/8GMW/8GSF/8GSW
Scania EMS S8 BAM. Just 3 point PCB connection into VIA holes. Can be connected without removing gel.
BMW MSD80, MSV80, MSD81, MSD85.0/MSD85.4, MSD85.1/MSD85.3, MSD87.1/MSD87.2, MSV90
PSA SID208
MB SID307, SID310
Renault SID307, SID309, SID310
Porsche SDI21.x
Mitsubishi E6T83XXX, E6T32xxx
Isuzu Transtron SH72544R
Isuzu Transtron L4.3
Hino EDC7UC31
Hyundai, Greatwall DCM6.2AP
and other...
Which 67 modules are supported by PCMtuner?
PCMtuner 67 modules contains module 1- module 74 (except module 28, 37, 39, 41, 44, 49, 51).
Check the details below.
Kindly notice:
If you have bought V1.20 KTM Bench, KTM Bench3 in 1, you can update it to V1.21 PCMtuner by returning the old dongle back to us for updating, or buy an extra new 2022 PCMtuner dongle.
The price:
l Update fee: €73
https://www.eobdtool.co.uk/wholesale/update-ktm-bench-to-pcmtuner.html
l 2022 PCMtuner Dongle: €183
https://www.eobdtool.co.uk/wholesale/pcmtuner-dongle.html
Note: The old KTMOBD also can be updated to V1.21 PCMtuner by returning the old dongle. Contact eobdtool.co.uk customer service to learn more.
What is the 2022 V1.21 PCMtuner?
PCMtuner tool can read and write ECU data through OBD, BENCH, and BOOT modes.
It also performs a complete backup of ECU data, easy ECUs clones, and power upgrades. Moreover, it supports gearboxes reading and writing as well.
What can 2022 PCMtuner do?
V1.21 PCM Tuner ECU programmer supports the functions as below.
1. Read and write ECU data
2. ECU clone.
3. ECU parameter adjustment
4. ECU maintenance engineering
5. Chip turning
6. Read ECU maps
7 .Checksum correction
8. Stage1-3, gearbox tuning, LC, sportdisplay, immo off, adblue off, dpf off, dtc off, vmax, swirl off
9. Read flash and ep files
10. Powertrain adjustment
11. Support online update
12. VR files supply
13. Pinout comewith
14. Helpdesk and tuner account
15. OBD2 reading
16. Cover-free wielding-free no disassembly data reading, greatly reduce the risk of destroying the ECU, bench mode.
17. Cover-opening data reading, boot mode
What’s the new upgrade of 2022 PCMtuner?
Compared with version 1.20, PCMtuner has newly added 44 protocols, and 200 Bosch ECU, MED/EDC17 read/write protocols without opening the cover.
VAG Simos 12.1, 12.2
VAG Simos 18.1, 18.2
VAG Simos 18.10
VAG Simos PCR2.1
FCA GPEC2, GPEC2A, GPEC4, GPEC4LM
Hyundai/KIA SIM2K-240, SIM2K-241,SIM2K-250, SIM2K-251, SIM2K-260, SIM2K-305, MT86
Ford/LR SID208 Flash read
FCA Marelli 8GMK/8GML, MJ9DF, 10GF
FAL Marelli MJ8DF/8F2, 8GMB/8GMC/8GMF/8GMW/8GSF/8GSW
Scania EMS S8 BAM. Just 3 point PCB connection into VIA holes. Can be connected without removing gel.
BMW MSD80, MSV80, MSD81, MSD85.0/MSD85.4, MSD85.1/MSD85.3, MSD87.1/MSD87.2, MSV90
PSA SID208
MB SID307, SID310
Renault SID307, SID309, SID310
Porsche SDI21.x
Mitsubishi E6T83XXX, E6T32xxx
Isuzu Transtron SH72544R
Isuzu Transtron L4.3
Hino EDC7UC31
Hyundai, Greatwall DCM6.2AP
and other...
Which 67 modules are supported by PCMtuner?
PCMtuner 67 modules contains module 1- module 74 (except module 28, 37, 39, 41, 44, 49, 51).
Check the details below.
免责声明：本文中使用的图片均由博主自行发布，与本网无关，如有侵权，请联系博主进行删除。
上一篇:
PCMTuner V1.21 FAQs: Price, Update, Dongle, Car List…
下一篇: Solution: Autel IM508 Plus XP400 Pro Fix BMW FRM
下一篇: Solution: Autel IM508 Plus XP400 Pro Fix BMW FRM
全部作者的其他最新博文
- • OBDSTAR Converter V2 DB15-OBD16 Adapter User Guide
- • How to Connect Xhorse MLB Solder Free Adapter with MLB Tool?
- • How to Program 2014 BMW X1 CAS3 Smart Key with Lonsdor K518 Pro?
- • How to Connect Yanhua ACDP Module 35 with Toyota R7F714xx ODO/Buick BCM D70F3558
- • How to Correct Toyota R7F714xx ODO/Buick BCM (NEC3558) Mileage with Yanhua ACDP2
- • CG FC200 Correct VW MED17.5.25 Mileage Guide
