This is a test about how KTM BENCH 3 IN 1 works on TOYOTA INNOVA 2009 MODEL. 

What we prepared:

KTM Flash KTM Bench KTM OBD1.20 3 in 1 ECU Programmer

DELL Laptop

TOYOTA INNOVA 2009

What we did:

Connect KTM Bench to the vehicle via OBD cable, and connect to laptop by USB cable

Plug the KTM 1.20 32 IN 1 dongle into the laptop

Start the car

Very important!!!

Make sure you have downloaded and installed the related KTM BENCH 3 IN 1 software before performing operation. 

Free download links as below: 

1. On mega:

https://mega.nz/folder/ZDIyzD4Q#Vc7l8l3_aMXngXoMDY8gQQ

2. On Chinese weiyun

https://share.weiyun.com/bG2lLOp5

Password: udv8ds

Size: 3.56 GB

No risk!

Note: If you don’t have a Chinese weiyun account, please feel free to contact eobdtool.co.uk to download ASAP.

Reference: Free Download and Install Software for V1.20 Ktmflash Ktmbench Ktmobd 3 in 1 ECU Programmer

The test:

Open the PCMflash software 

Then you can see the interface incl. interface, ECU, File. 

These functions can be performed

• Identification
• Read DTC
• Clear DTC

Select the corresponding ECU 

i.e Toyota/Lexus/Hino/Scion>>76F0004/12/23/38/39/40/70/85, MPC565 K-Line New

Step 1: Identify the ECU info

Click 'Identification'

Read out the interface is Scanmatik- SM2 USB

DLL: 1.0.0.15 (built 12.02.19)

Firmware: FW: 0808 HW: 02 SN: A55259

Protocol: Toyota: 76F0004/12/23/38/39/40/70/85, MPC565 K-Line New

Calibration: 30KA3000

Calibration file: 89663- 0KA30

Hardware: KUN#2KDFTV

Part Number: 89661-0KD50

Step 2: Read DTC

Click 'Read DTC'

It reads out the number of DTCs stored is 0

Step 3: Clear DTC

Click 'Clear DTC' 

Completed

It's so easy to read ECU, DTC and clear DTC by KTMFLASH KTMBENCH KTMOBD 3 in 1.

Hope it helps! Have fun!

UK Professional OBD2 Tools Online Shop