This is a successful demonstration of how to add two new keys for Hyundai Santa FE 2010 by Autel IM608 when all keys are lost. 

Let's start it from the key decoding.

Tools:

LISHI Decoder

Autel MaxiIM IM608

Xhorse Dolphin XP-005 key cutting machine

MINI Key Tool

XSKF01EN smart key

Get door key bitting by LISHI Decoder.

Use Xhorse Dolphin XP-005 key cutting machine to make two blades.  

The keys can only open the car's door.

Step 2. Generate transponder

So now we're going to generate remote by VVDI MINI Key Tool. 

Press 

Vehicle Remote>>Hyundai>>Santa Fe>>Elantra KeylessGo ID46 433

Insert the Xhorse XSKF01EN smart key into the coil and press “Generate”. 

Step 3. Read PIN code

Now into the car.

Open the Autel IM608.

Press 

IMMO>>Hyundai>>Manual selection>>Europe>>SANTAFE (CM)>>2010-2013>>Smart Key

Confirm the vehicle information and enter the main menu.

If anything puzzles, here select "Vehicle immo information" to check the key information and OBD position.

Then press "Immo status scan", because we need to clear the DTCs first. 

After scanning, select the fault one and select "Clear DTC" to clear the DTC as the prompts.

On scanning interface, press 

Read PIN>>Read Pin code(46 Smart card)>>Read Pincode by OBD

Here it will say that the function only supports vehicles with 46-chip smart card. 

Follow the prompts.

Then we have the password.

Step 4. All key lost programming

Back to scanning interface, press "All keys lost(guided)".

For step 1, it will erase all existing keys. 

Insert the smart key to be programmed into the card slot

For step 2, enter the password we just read. 

For step 3, we can repeat the step to add keys.

Install the proximity key into XSKF01EN key.

Now we can start the car with the new key.

Complete! Nice work!

As you can see, very professional works and user-friendly guided procedure.

Masterpiece from Museum's locksmith service.

UK Professional OBD2 Tools Online Shop