博文

How to Reset Dashboard by Yanhua Digimaster 3 with Solder-free Adapter?

已有 528 次阅读2021-10-20 22:05 |系统分类:科技教育| yanhua, digimaster 分享到微信

Purpose: Reset Dashboard in 3mins

Model: VW Bora 2009

Dashboard ECU: 24C32

Coverage:

Car coverage list

Connection

Connect the solderless adapter to Yanhua Digimaster 3

Connect dashboard ECU to solderless adapter by EEPROM clip.

Make sure red line is connected to PIN1.

On solderless adapter, select chip type “24XXX”.

Then press “test” to make sure all PINs are connected well.

Finally, insert the adapter into Digimaster 3 Correction Tool.

Procedure

On Digimaster III Cluster Tool,

Select

Meter System>>Europe>>Volkswagen>>Bora>>18G920826>>2009 and next

Check original mileage and save its data as a backup.

Input new parameter and go on.

Program success.

Done! Less than 3mins.

Video demo link:

If you’re interested in this package, here is the link:

More Pro Tools on

免责声明：本文中使用的图片均由博主自行发布，与本网无关，如有侵权，请联系博主进行删除。

上一篇: Lonsdor K518ISE/K518S - Good Ford IMMO Programmer
下一篇: Autel IM508 Programs Chrysler Jeep Dodge Used PCM