博文

How to use JDIAG P200 & Comparision

已有 675 次阅读2021-6-2 22:04 |系统分类:科技教育| JDIAG, P200 分享到微信

P200 JDIAG SMART HOOK Powerful Probe new generation of intelligent circuit analyzer is a new upgradeable circuit tester on the market. It is a tool for quickly testing all 9V-30V electronic systems. The test time is greatly shortened, convenient, fast and smarter!

Jdiag P200 vs. Autel PS100:

Item	Jdiag P200	Autel PS100
IMG
Operation Voltage	9-30V	12/24V
Testing Voltage	0-150V	0-70V
LCD Screen Display	2.4 inch Color LCD	1.7 inch Color LCD
9-Grid Navigation Menu	√	×
Circuit Protection	√	√
Fuse Protection	√	×
Alligator Battery Clip	Special Design	Normal
DC Voltmeter	√	√
AC Measurement	√	√
Smart Ohms/Volts	√	×
Hertz/Frequency	√	√
5-Button Navigation	√	×
Relay Test	√	×
Diode Test	√	√
Relay Test Diagram	√	×
Fuel Injector Test	√	×
Oscilloscope Mode	√	×
Positive/Negative Display	√	×
Safety Power Supply	√	×
Component Activation	√	√
Activation Model Selectable	√	×
Full Multimeter Mode	√	×
Multi-language	√ (English, Spanish, Dutch, French, Italian, Portuguese, Polish, Russian, Vietnamese, Chinese)	×
Home Screen Change Style	√	×
Update Online	√	×

From the comparison table, we can see Jdiag P200 wins Autel PS100. It comes with a bigger Color LCD, has the smart 9-Grid Navigation Menu and supports more functions. Besides that, it’s also available in multi-language and supports updates online while PS100 doesn’t.

Next, let’s learn more details about JDIAG P200 Smart Hook Intelligent Electrical System Circuit Tester.

Here is the JDIAG P200 unboxing video.

https://www.youtube.com/watch?v=IjuKg-JkG_U

The package including:

1) Main unit

2) Solid copper test probe

3) Double pass test connection line

4) Alligator clip battery cable (Special Design)

5) Relay test line

6) Probe adapter

7) 25Amp fuse

8) Operation manual

9) Packing Toolbox

In the main menu, you see the test modes and setup as below:

Smart
Multimeter
Oscilloscope
Relay
Active
0-5V
Injector
P-N
Set up

Check each test mode and setting guide.

Smart test mode: confirmed

Smart test mode is designed to detect resistance values or voltage values automatically.

When you test the probe tip to an electrical system, it will display voltage values.

If it detected voltage signal and when you test the resistance, it will display as ohms. So you don’t need to switch between voltage test and resistance test.

Multimeter test mode: confirmed

The function is completely the same as you’re using a multimeter. You can perform voltage tests, resistance tests, diode continuity tests, current tests and frequency tests.

How to use:

Press the "right" button to select the test mode.

Press the "Left" button to exit.

1)DC Voltage (VDC): Connect the probe clip (auxiliary ground lead) to the negative pole, and connect the probe tip to the measured voltage.

2)Resistance (OHM): Connect the probe clip (auxiliary ground lead) to one side of the Resistance being measured and the probe tip to the other side.

3)Diode/Continuity Test (DIO): Connect the probe clip (auxiliary ground lead) to one side of the Diode being measured and the probe tip to the other side. Meanwhile, it will display the voltage and show the positive and negative of Diode.

4)Current (AMP): The probe is connected in series in the circuit under test, it will display the current value.

5)Frequency (HZ): Display the frequency of the measured signal and duty cycle value.

Oscilloscope Test mode: confirmed

Oscilloscope Test is quite useful to diagnose sensors, actuators and communication signals.

With this simple oscilloscope test function, you can diagnose maximum-minimum voltage, waveform frequency and duty cycle.

Relay test mode: confirmed

There are two common relay types: 5 terminals and 4 terminals.

Put the relay test cable into the probe and check the connection diagram.

Clip-on the cables to each terminal on the relay.

And press the UP button to trigger the power supply to test relay working status.

Activation test mode: confirmed

The activation test function is designed to generate activation signals to the tested components such as car lights, motors and other onboard electric equipment.

Here is activating a car light.

There are three activate modes: moment, latch and pulse, you can also set the overload current values.

0-5V Safety power supply mode: confirmed

The safety power supply is different from the activation test.

In this mode, you can adjust output voltage under 5 volts and output current to 100 milliamps, this is a safe way to protect the sensitive sensors.

Fuel Inject Test Mode: confirmed

There are four test modes in this function, the probe outputs different pulse signals to the injector and checks the spraying status.

It can be worked with any fuel pressure tester, this is a good way to diagnose injector working conditions.

Positive/negative test mode: confirmed

This function is designed to quickly find the circuit polarity in electrical system. It will display voltage values, ground icons after detected related signals.

Finally, check the setup menu.

From the setting interface, you can perform sound, language and firmware upgrade. There are more than 20 languages selectable in Jdiag P200 Smart Hook Circuit Tester, and you can also do online updates for free.