AUTEL MK808 diagnostic scanning tool can meet a variety of special functions, including EPB| Oil reset| BMS, etc., and it is still growing. This article will introduce How to Bleed ABS Brakes by Autel MaxiCOM MK808.

Firstly, let’s know when and why you should bleed the ABS brake system.

1.When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity.

2.If the ABS computer, ABS pump, brake master cylinder, brake cylinder, brake line, or brake fluid is replaced, the ABS bleeding function must be performed to bleed the ABS.

Now, let’s see how to bleed the brake system by Autel MK808.

Take 2017 Hyundai (Korea) Accent (RB) as an example

Connect MK808 to the corresponding vehicle via the main cable properly

Enter “Brake Bleed” service function 

Select Asia-> Hyundai-> Automatic selection

Then click “Read” to acquire VIN directly

Select Hyundai (Korea) and confirm the vehicle info detect out

Select Hot functions-> Brake bleed-> HCU Air bleeding mode

Ensure solenoid valve status: closed and motor pump status: Off, then continue 

When all normally closed (NC) valves and the pump motor are activating, depress the brake pedal to the floor. When pump motor activation stops, release the brake pedal. Repeat until the time reached the 60s.

Now the ABS brake bleed on MaxiCOM MK808 is done!

Besides Hyundai (Korea), the Autel Maxicom Mk808 OBD2 scan tool also supports Hyundai (Europe/General/USA) brake bleed special function.

Check the specific car model, please visit 

https://www.autel.com/vehicle-coverage/coverage2

Source: http://blog.eobdtool.co.uk/how-to-bleed-abs-brakes-by-autel-maxicom-mk808/