This post shares the guide to add Key VW GOLF MK7 with Autel MaxiIM IM608/IM508.

Here are the steps:
1.Click “Volkswagen”>>“Advanced Mode”>>“MQB(beta)”>>turn on the ignition of the vehicle>>“Yes”>>“Key learning”, then we can read Immo data.

2.Keep the original key close to the transponder and click “OK”.

3.When reading Immo data is completed, we’ll begin making dealer keys. Put the original vehicle key in the programmer keyhole and then press “OK”.

4.When reading original key data is successful, remove the original vehicle key from the programmer keyhole and put a blank key in the programmer keyhole and then press “OK”.

5.When making dealer key is finished, start to do key adaption to vehicle.

6.Enter the number of keys to be learned, say, “2” and click “OK”, and then keep the original key close to the transponder.
7.Remove the blank key out of the programmer keyhole and act according to the info. of the screen.

Job is done!

Source:http://blog.eobdtool.co.uk/autel-maxiim-im608-im508-add-key-vw-golf-mk7/