切换至摄影模板
博文
Benz ECOM DOIP Quick Test, Clear Fault Memory on Benz E320L
|
BENZ ECOM DOIP comes with USB Dongle can support diagnosis and programming for latest Mercedes-Benz till year 2019. Here is test report on Benz E320L.
Preparation:
Car: Mercedes-Benz E320L
Device: Benz ECOM DOIP with Xentry software
Procedures:
Follow this connection diagram to connect all the devices
Connect ECOM DOIP to vehicle via OBD, and then connect to computer by USB cable
Switch ignition on
Run XRNTRY software
Select car brand, and select vehicle model from product group
The diagnosis application is being started…
At the same time, the LEDs of Benz ECOM flash
The data are being loaded
Click the second icon at the left hand column
Determine the data automatically
Click “Start quick test”
When finish testing, save the test result
Click “Clear fault memory”
Erase success
Click “Start quick test” again
There is no fault memory this time
Then close XENTRY software
Here is the related ECOM DOIP test video for reference:
Get Benz ECOM DOIP with USB Dongle at best price (get 28% off):
http://www.eobdtool.co.uk/wholesale/benz-ecom-diagnosis-programming-tool.html
Article source:http://blog.eobdtool.co.uk/benz-ecom-doip-quick-test-clear-fault-memory-on-benz-e320l/
Preparation:
Car: Mercedes-Benz E320L
Device: Benz ECOM DOIP with Xentry software
Procedures:
Follow this connection diagram to connect all the devices
Connect ECOM DOIP to vehicle via OBD, and then connect to computer by USB cable
Switch ignition on
Run XRNTRY software
Select car brand, and select vehicle model from product group
The diagnosis application is being started…
At the same time, the LEDs of Benz ECOM flash
The data are being loaded
Click the second icon at the left hand column
Determine the data automatically
Click “Start quick test”
When finish testing, save the test result
Click “Clear fault memory”
Erase success
Click “Start quick test” again
There is no fault memory this time
Then close XENTRY software
Here is the related ECOM DOIP test video for reference:
Get Benz ECOM DOIP with USB Dongle at best price (get 28% off):
http://www.eobdtool.co.uk/wholesale/benz-ecom-diagnosis-programming-tool.html
Article source:http://blog.eobdtool.co.uk/benz-ecom-doip-quick-test-clear-fault-memory-on-benz-e320l/
免责声明：本文中使用的图片均由博主自行发布，与本网无关，如有侵权，请联系博主进行删除。
上一篇:
How to Solve SVCI J2534 "Unregistered software. Expired data: XXX" Err
下一篇: V159 JLR Mangoose SDD Pro FAQs
下一篇: V159 JLR Mangoose SDD Pro FAQs
全部作者的其他最新博文
- • OBDSTAR Converter V2 DB15-OBD16 Adapter User Guide
- • How to Connect Xhorse MLB Solder Free Adapter with MLB Tool?
- • How to Program 2014 BMW X1 CAS3 Smart Key with Lonsdor K518 Pro?
- • How to Connect Yanhua ACDP Module 35 with Toyota R7F714xx ODO/Buick BCM D70F3558
- • How to Correct Toyota R7F714xx ODO/Buick BCM (NEC3558) Mileage with Yanhua ACDP2
- • CG FC200 Correct VW MED17.5.25 Mileage Guide
