博文

CG Pro 9S12 Test Report: Adjust Mileage for 2016 BMW G Series Successfully

已有 1653 次阅读2020-2-27 02:46 |系统分类:科技教育| Pro, 9S12 分享到微信

Confirmed! CG Pro 9S12 programmer tested 100% on 2016 BMW 740 Li G12.

Good news: CG-PRO 9S12 best price: 280 euro with free shipping

http://www.eobdtool.co.uk/wholesale/cg-pro-9s12-programmer-full-version.html

Test report:

Preparation:

Car: BMW 740 Li

Series: G12

Year: September 2016

Module: Dashboard

Chip: 35128WT

Device: CGDI Pro 9S12

Note: Need to add filter after odometer adjustment

Procedure:

Check the car model and record the original mileage

Turn off the ignition switch and dismantle the dashboard from the car

The storage chip is confirmed: 35128WT

Then go to correct odometer

Plug 35160WT adapter into CGDI PRO 9S12 main unit

Open CG PRO software and click “read” to read out the original data is 61938 KM, then save it

Input the new mileage 2000 and click “OK.”

Adjust the mileage successfully

Add a BMW filter then install back to the car

Tips: The latest BMW can filter 18 in 1 is universal for multiple car models, small and convenient, easy operate, with stable performance and reliability. It supports the following models:

BMW: CAS4/FEM Fxx

BMW 1 series F2X, 3 series F3X, BMW X5 etc., FEM mileage adjustment( no need to remove FEM, connect directly to instrument panel);
BMW 5 series F10, 7 series F01/02 etc., CAS4 Fxx chassis.( F01, F02, F07, F18, F10, F20, F25, X3 etc., applicable for 9S12 XEP series 5M48H/1N35H)

The wiring diagram:

Black --------- GND                   Red --------- +12V      White --------- +5V
Purple -------- L1(CAN_L1)    Green --------- H1(CAN_H1)
Yellow --------- L2(CAN_L2)    Blue --------- H2(CAN_H1)
NOTICE! Please connect the 2 BMW dots together (short circuit) BEFORE connection to the car!

1.diagram for BMW 1 series F20 instrument: