博文

How to save OBDSTAR H105 Log data when fails to communicate

已有 894 次阅读2020-2-20 02:01 |系统分类:科技教育| OBDSTAR, H105 分享到微信

This is a feedback from OBDSTAR H105 customer “A message ‘Communication Breakdown” appeared on my H105 device screen when I programmed 2012 Hyundai sonata w/key, I tried to test on all the car models options, also got this prompt”.

If you have the same problem as this customer, you can send the Log data to OBDSTAR engineer.

This is the step-by-step guide to save the OBDSTAR H105 key programmer data. Hope it helps you.

Step 1: Connect OBDSTAR H105 device and start it

Press “OPTION”-> Press “Data Logging”-> Press “ON” -> Press ESC-> Back to the main menu

Step 2: Keep the H105 device at “ON” state

Go to test the car

When it fails to do the program, power off the H105 code reader

Step 3: Take out the TF card where there is a LOG file

Step 4: Send the LOG file to your distributor or OBDSTAR engineer

They can study the data and figure out the reason

Please kindly notice:

Every time when you power off the OBDSTAR H105 auto key programmer, Data Logging would be “OFF”. So if you want to save the data next time, please repeat the procedures above.

This method is available for all the OBDSTAR hand-held devices (H series tools, F-series tools, X300M, X100 Pro, etc.)

Enjoy!

免责声明：本文中使用的图片均由博主自行发布，与本网无关，如有侵权，请联系博主进行删除。

上一篇: CG Pro 9S12 Test Report: Adjust Mileage for 2016 BMW G Series Successfully
下一篇: FOXWELL NT644详细评论